WTB: ECU, Shorties, Motor Mounts, C5 Windage Tray
I need the following parts for my 01 LS1 Engine. I have a custom harness that should work on any 99-02 electronics. The engine is going in a '70 911
GTO Front Sump LS1 oil pan with windage/pickup/dipstick.
Alternator
Shorty Headers
Motor Mounts
I think there are a few sensors I'm missing, but I'll update this post later with anything else, and to strikeout what parts people have offered.
Thanks!
GTO Front Sump LS1 oil pan with windage/pickup/dipstick.
Alternator
Shorty Headers
Motor Mounts
I think there are a few sensors I'm missing, but I'll update this post later with anything else, and to strikeout what parts people have offered.
Thanks!
Last edited by mbaran; Jul 28, 2010 at 12:45 PM.
Trending Topics
I have a set of Edelbrock LSx shorties, ceramic coated, used less than 6 months on a 408 turbo 2002 T/A. In near new condition. Also have the Edelbrock Y-pipe to go with it. All bolts. You just need new flange gaskets.
Didn't like the rear-mount turbo lag, so went supercharger.
Sending PM.
Didn't like the rear-mount turbo lag, so went supercharger.
Sending PM.


cheap. 