FS: SLP DS Loop; Stock Injectors; Stock LS1 Crank;Washer/Dryer - MORE!!
I have some various parts/appliances/furniture for sale after my rebuild. Everything is OBO, but if your offer is below asking price, understand that I will wait for that better offer or someone offering asking price. I am located near the Heights in Houston and would prefer local pickup or I could meet at a reasonable distance. Just ask 
USED - Stock Flywheel & PP - Appears to be undamaged and is from a 2004 GTO. Car has 85K miles. - $40.00
USED - SLP Driveshaft Safety Loop - Black. Just incase you are wondering, this will not work with my torque arm and Mac mid length y-pipe. I am unsure of the brand of my torque arm, it may be BMR, but I thought those had an etching in the gap between the rods. I am not liable for fitment issues. I paid $30 for it, so I will let it go for what I paid, even though I cleaned the crap out of it, and received it with over 1/2" of grease and dirt! - $30.00
USED - (8) Stock 2002 LS1 Injectors - 28#/hr? These were working perfectly before I upgraded due to the high demands of my new setup. They have roughly 77K miles on them and come with the o-rings for the top and bottom as well. - $75.00
USED - Stock LS1 Crank - Appears to be undamaged, clean mains, clean rods, reluctor wheel, etc. Feel free to come check it out prior to commitment. - $50.00
USED - 15 y/o Electric Washer/Dryer Combo - Almond. I had these at my old rent house and the new place in the Heights uses gas. Since I could buy a new washer/dryer combo that would be cheaper than adding a new 4 wire 220-240VAC outlet, I don't need these anymore. FYI: 3 WIRE DRYER CORD! I got a new washer/dryer for free and paid $100 for the set I am selling. Everything works just fine. - $80.00
USED - Solid Wood Pottery Barn Round Kitchen/Dining Room Table. This was bought about 2 years ago and for about, IIRC, $450. The table does have collapsible side leafs with very solid supports. Each side leaf has (2) 1" x 1" square wooden rods that extend over 75% the length of the leaf. This just did not go with the look of our new place, so I am offering it here before I go to Craigslist. I have broken this table down, removing the legs and taping the hardware to the underside of the table for storage and transportation. This will easily fit in someone's car so you wouldn't necessarily need to bring a truck. There are some light scratches on it as well as some light water warped lines. See pictures below. I was originally going to ask for $275 until I saw the warps and scratches. - $150.00
SLP Driveshaft Safety Loop - Black

(8) Stock 2002 LS1 Injectors 28#/hr?


Stock LS1 Crank


15 y/o Electric Washer/Dryer Combo - Almond


Solid Wood Pottery Barn Round Kitchen/Dining Room Table

Scotch Tape Sold Separately! Shown for sizing reference! HAHA!

Scotch Tape Sold Separately! Shown for sizing reference! HAHA!

Feel free to shoot me an email/text/PM or just post for questions/additional pictures.
Brian Lockler - blockler@gmail.com; blockler@kwintl.com; 713-855-8044
USED - Stock Flywheel & PP - Appears to be undamaged and is from a 2004 GTO. Car has 85K miles. - $40.00
USED - SLP Driveshaft Safety Loop - Black. Just incase you are wondering, this will not work with my torque arm and Mac mid length y-pipe. I am unsure of the brand of my torque arm, it may be BMR, but I thought those had an etching in the gap between the rods. I am not liable for fitment issues. I paid $30 for it, so I will let it go for what I paid, even though I cleaned the crap out of it, and received it with over 1/2" of grease and dirt! - $30.00
USED - (8) Stock 2002 LS1 Injectors - 28#/hr? These were working perfectly before I upgraded due to the high demands of my new setup. They have roughly 77K miles on them and come with the o-rings for the top and bottom as well. - $75.00
USED - Stock LS1 Crank - Appears to be undamaged, clean mains, clean rods, reluctor wheel, etc. Feel free to come check it out prior to commitment. - $50.00
USED - 15 y/o Electric Washer/Dryer Combo - Almond. I had these at my old rent house and the new place in the Heights uses gas. Since I could buy a new washer/dryer combo that would be cheaper than adding a new 4 wire 220-240VAC outlet, I don't need these anymore. FYI: 3 WIRE DRYER CORD! I got a new washer/dryer for free and paid $100 for the set I am selling. Everything works just fine. - $80.00
USED - Solid Wood Pottery Barn Round Kitchen/Dining Room Table. This was bought about 2 years ago and for about, IIRC, $450. The table does have collapsible side leafs with very solid supports. Each side leaf has (2) 1" x 1" square wooden rods that extend over 75% the length of the leaf. This just did not go with the look of our new place, so I am offering it here before I go to Craigslist. I have broken this table down, removing the legs and taping the hardware to the underside of the table for storage and transportation. This will easily fit in someone's car so you wouldn't necessarily need to bring a truck. There are some light scratches on it as well as some light water warped lines. See pictures below. I was originally going to ask for $275 until I saw the warps and scratches. - $150.00
SLP Driveshaft Safety Loop - Black

(8) Stock 2002 LS1 Injectors 28#/hr?


Stock LS1 Crank


15 y/o Electric Washer/Dryer Combo - Almond


Solid Wood Pottery Barn Round Kitchen/Dining Room Table

Scotch Tape Sold Separately! Shown for sizing reference! HAHA!

Scotch Tape Sold Separately! Shown for sizing reference! HAHA!

Feel free to shoot me an email/text/PM or just post for questions/additional pictures.
Brian Lockler - blockler@gmail.com; blockler@kwintl.com; 713-855-8044
Last edited by 1SLwLS1; Sep 10, 2010 at 08:36 AM. Reason: Update





