Category: Engine - Complete Motors
Price: $1
Part Fits: 93-02 Chevrolet Camaro, 93-02 Pontiac Firebird, Corvette, 04-06 Pontiac GTO
Location (State): FL
Item Condition: Brand New
Shipping Information: Item Can be Shipped
Engine: LS1/LS6
LS Engine?: Fits LS Engine

I can seperate the kit just pm me an offer. I can add
front and rear covers, valley cover, valve covers
oil pan & pickup for $3000

GM 6.0L Iron Block - machined for stroker kit, bored out 4.030"
Part #GM-6.0L-IBB
Sonic tested
https://www.vengeancerd.com/ecart/pr...ron-BARE-Block

408 cubic inch Stroker kit from Vengence
Diamond Pistons 6.0 liter LS1 Forged Flat Top Piston set w/ -2cc Valve Reliefs - Part # DP-11510
- 6.125" length
- 4" stroke
https://www.vengeancerd.com/ecart/pr...30%22-Bore%09-

Callies DragonSlayer 4340 Forged Crankshaft, LS1/LS6 4.00" stroke/6.125", 2.100" Pin Size
Part # 121-APO31V-DS
4340 Forged & Nitrided steel
https://www.vengeancerd.com/ecart/pr...00%22-Pin-Size

Crower Rods
Part #258-SP93272B-8 - Crower Sportsman Cap Screw Connecting Rods

Head and Cam Install Gasket Kit, 1997-98 LS1
MLS head gaskets 4.030" bore
https://www.vengeancerd.com/ecart/pr...997%252d98-LS1
-------------------------------------------------------------------------

6.0 block - new in crate 4.0" bore, $699
https://www.vengeancerd.com/ecart/pr...ron-BARE-Block
-------------------------------------------------------------------------

GMPP Hydraulic Roller Caddie Race Lifters for LS-Series Engines - $175
Part #88958689
https://www.vengeancerd.com/ecart/pr...eries-Engines-
-------------------------------------------------------------------------
Rebuilt GM 853 Heads $150
- new Rev valves 2.0" & 1.65"
- new seats
- new valve guides
- new guide plates
- polished chambers
-------------------------------------------------------------------------
New Crane gold 1.8 roller rockers - $249

------------------------------------------------------------------------
Pro Comp Ultra Lite mechanical fuel gauge
- 2 1/16" with fuel line and bracket $75

-----------------------------------------------------------------------

NEW 36lb Accel injectors $199

-----------------------------------------------------------------------

BBK 85mm polished Throttle body 199

---------------------------------------------------------------------

Speed Inc Fuel rails new, $135

------------------------------------------------------------------------

Creative Performance fuel rails $125

-------------------------------------------------------------------------

Creative Performance regulator $129

-------------------------------------------------------------------------

Earls stainless fuel hose setup $150

-------------------------------------------------------------------------

Bosch 255 liter fuel pump $150

-------------------------------------------------------------------------

Yank SS4000 convertor for turbo 400/350 $500 obo

-------------------------------------------------------------------------

TCI Turbo 400 Reverse Manual Valve Body and Transbrake - 5000 miles- $900

-------------------------------------------------------------------------
-------------------------------------------------------------------------

SOLDTCI flexplate $199 obo

SOLDNew Meziere blue 319 electric water pump , bolted on to block but never run. $450

SOLD Katech adjustable tensioner - $75

SOLDls1 coils - set of 8 with brackets $99

SOLDWieand polished intake 80mm same as ls6 intake - $325


thanks
Rich

 

more pics

 

so for 2500 you get a bloc and rotating asymbly?

 

2500 for the rotating assembly and 600 for the block

Also have an Aerospace coolant overflow

GM Cadillac Lifters
GMPP Hydraulic Roller Caddie Race Lifters for LS-Series Engines - $175
Part #88958689

 

Make some offers just not too low lol

 

why are you selling it anyways? what is the difference between the speed inc. rails for 150 and the other fuel rails listed for 125? also i am looking for a set of stainless lines for a returnless fuel system so just the feed line with male connector for the fuel line and the crossover line between the fuel rails, you got what im looking for?

 

The fuel rails in the pic with the polished wieand intake have some paint loss so I thought they would be a little less. I have 2 sets of speed inc fuel rails. The fuel lines are just as pictured in the ad.
thanks
Rich

 

pm sent

 

Lots of interest and parts still available

 

tensioner tentatively sold but no cash yet

 

bump...

 

bump...

 

would ya take $400 for the water pump?

 

I can do close to that with some for shipping.

 

What color is the new SpeedInc fuel rail? Pics?

 

Speed Inc fuel rails are polished aluminum
thanks
Rich

 

is the stroker kit still in the block

 

It's dissasembled as a member wanted the kit and not the block but they didn't follow threw on the deal.

 

bump...

 

Some parts still for sale