Victor Jr Intake with Fuel Rails
Thread Starter
Joined: Aug 2004
Posts: 571
Likes: 1
From: Richmond, VA
Category: Engine - Intake/Fuel
Price: $400
Part Fits: 93-02 Chevrolet Camaro, 93-02 Pontiac Firebird, Corvette, 04-06 Pontiac GTO, 04+ Cadillac CTS-V
Location (State): VA
Item Condition: Used
Shipping Information: Item Can be Shipped
Engine: LS2/LS3/LS7/L92/LS9, LS1/LS6
LS Engine?: Fits LS Engine
Injectors are not included
Prices include shipping/Paypal fees
Paypal welcome
I purchased this setup from Calspeed Performance and never used it, it is used, just not by me
Last edited by csjta2; Oct 4, 2010 at 07:25 AM.
Thread Starter
Joined: Aug 2004
Posts: 571
Likes: 1
From: Richmond, VA
Should, I asked Aaron when I got what it would fit, this is his reply
Chris,
Depending on how new it is it might be a 92mm opening. I have made both. But yes, the bolt pattern is the same for all the newer throttle bodies. NW, FAST, Holley, stock ls2, etc.
Worst case all you will need to do is get in there and open up the 90mm's to 92mm's, which shouldn't take long at all with a die grinder and some WD-40.
If you have any other questions, let me know.
Thanks,
Aaron
Chris,
Depending on how new it is it might be a 92mm opening. I have made both. But yes, the bolt pattern is the same for all the newer throttle bodies. NW, FAST, Holley, stock ls2, etc.
Worst case all you will need to do is get in there and open up the 90mm's to 92mm's, which shouldn't take long at all with a die grinder and some WD-40.
If you have any other questions, let me know.
Thanks,
Aaron
Last edited by csjta2; Sep 30, 2010 at 02:50 PM.





