Drag Racing Tech
Sponsored by:
Sponsored by:

Couple vids on a new combo..

Thread Tools
 
Search this Thread
 
Old Feb 1, 2004 | 05:28 PM
  #1  
kp's Avatar
kp
Thread Starter
8 Second Club
iTrader: (34)
 
Joined: Nov 2001
Posts: 10,852
Likes: 1
From: Knoxville, TN
Default Couple vids on a new combo..

Seeing about 7psi at 6400 on a 100% stock engine, LS1 intake and all, except for 918 springs, mac headers, mac ORP through the stock dual/dual exh. Raceweight was 3565 today.

Best was 7.22 @ 97.1 with a 1.650 60' I think the converter needs to be loosened up a bit, dead hooking with a 2.75 1st in the trans, 3.70 rear and a PT4200 should be a little better then that I would think.

Didnt get the 7.22 on video but these were close enough, if you were ever wondering how a procharger sounds you can hear it pretty well on these

http://69.128.0.221/

Next time I'll have a cutout on the car, I think the dual/dual is hurting me a bit..
Reply
Old Feb 2, 2004 | 09:21 AM
  #2  
Coach 02 A3 Z/28's Avatar
"The Drag Racing Director"
20 Year Member
iTrader: (10)
 
Joined: Jan 2002
Posts: 7,538
Likes: 4
From: Tomball, TX.
Default

Cool vids.

The procharger sounds pretty cool also.

Coach
Reply
Old Feb 2, 2004 | 09:46 AM
  #3  
kp's Avatar
kp
Thread Starter
8 Second Club
iTrader: (34)
 
Joined: Nov 2001
Posts: 10,852
Likes: 1
From: Knoxville, TN
Default

You can really hear the blower with the stock exhaust and the track was pretty abandoned so there was no other noise in the background. Once I get the converter loosened a little I hope the car will leave a little harder
Reply
Old Feb 2, 2004 | 05:13 PM
  #4  
Villain281H's Avatar
7 Second Club
iTrader: (5)
 
Joined: Nov 2001
Posts: 8,834
Likes: 1
From: Gainesville, Florida # of drag strips runs: ?!?!?
Default

nice vids, car seems like it could leave harder but plenty of mph. based on the 1/8 mile times you'd be looking at 11.30-11.40s in the 1/4
Reply




All times are GMT -5. The time now is 06:07 PM.