Category: Steering & Suspension
Price: $300
Part Fits: 93-02 Chevrolet Camaro, 93-02 Pontiac Firebird
Location (State): IN
Item Condition: Used
Shipping Information: Item Can be Shipped
Engine: LS2/LS3/LS7/L92/LS9, LS1/LS6
LS Engine?: Fits LS Engine

Like the title says. I have a Midwest Chassis Tunnel mount tq arm setup. Comes with tunnel mounted crossmember with the driveshaft loop built in. Perfect Tq arm setup for TSP Duals, or any other true duals. Tucks real nice. I been 1.44 60ft with this Tq arm NA 3800lb 6 speed car. It will fit a 12 bolt Moser, or Moser 9", maybe others?. I had it on both rear's. The only thing I had changed was the rearend bracket. I had a custom on made out of thicker material, as the one it came with started to crack and bend. Also comes with upgraded grade 8+ bolts...

all in all a BADASS Tq arm, worked awesome. Car is going back on the street. just a little much for the family(and my 15 month old) to ride confortable in

Trades:
-I need a full length Tq arm that attaches to the trans(I do have a Tq arm relocation trans crossmember from UMI) i dont care if its adjustable, we can work on the price as needed with a trade...
-TSP New style merge y pipe.
-4.10 gears for a 10 bolt and a Auburn style posi unit.
-Different camshaft swap parts?? MS4 MS3, pushrods(stock length) timing chain...
-also looking for a 5.3, or a LS1 if anyone is wanting to sell cheap enough.

-

 

Will this one work with a stock rear end? I have a 6 speed car with long tubes and going with true duals very soon. If so then I am highly interested in it, but don't have anything on your trades list. Shipping to 64108 business if it does work with factory rear.

 

I got some PM's, but you posted first about it, so your first in line.

I dont know off hand if it will work with a stock rear. maybe you can find midwest chassis name and PM them asking.

all I do know is I had a UMI stock mounted tq on the stock rear, had the same tq arm on the 12 bolt. i had this tq arm on the 12 bolt and my 9"....

 

Just emailed him and waiting on a response! Thanks for the dibs as I have paypal ready if it does. This comes with the tunnel brace and dssl correct?

 

Very interested. I have an adjustable BMR arm to offer as partial trade. Waiting to figure out if it will bolt to a stock 10 bolt. Let me know if the others fall through.

 

correct.

We can split shipping with paypal. thats how I usually do it.

 

PM sent

 

Still waiting to hear if it works with factory rear end...going to call now, tired of waiting on emails.

 

Will pick up!

 

any word on the fitment of a stock rear? I got several people in line all wanting to send money asap!

 

Ill take it if none of the others do. Ive got a 9"

 

Did some research and it looks like the BMR and UMI adjustable torque arms will bolt up to 10 bolots, 12 bolots, and most 9" rears. I think the fitment issues start when its a fabricated housing. I wll call Midwest Chassis to amke sure and if he says it will work, I am Papypal ready if and of the other deals fall through. And as I said, I have an adjustable BMR torque arm to offer up as partial trade so there's now down time looking for a torque arm for you (if time is an issue). Keep me posted on the other deals. Thanks.

 

Paypal is being sent! Thanks for holding the dibs as you will get great seller feed back for integrity!

 

got to do what is right! like i been trying to buy this y pipe off a member, i PM'd him 2 mins after he posted. he said I could have the y pipe for X amount and would be able to get me a pic and paypal address by Monday. Monday comes around, and guy wants to sell it all together to some other guy from more money... anyways long story short, i got pushed out of the way

sale pending(which i think its pretty much sold)

 

Did you get ahold of Eric at Midwest to verify this arm will fit on a 10 bolt or just banking of the research I did and posted?

 

part is sold! thanks guys!