Category: Drivetrain
Price: $2
Part Fits: 2010+ Camaro, 93-02 Pontiac Firebird, Corvette, 04-06 Pontiac GTO
Location (State): FL
Item Condition: Used
Shipping Information: Item Can be Shipped
Engine: LS2/LS3/LS7/L92/LS9, LS1/LS6
LS Engine?: Fits LS Engine

I have a small one car garage and I need to make some room.


3. LS3/L92 Rocker Stands. $10



5. I have the Oil Pump from an LS3 motor (upper picture). Clean in and out. $45

6. I also have an oil pump from a 6.0 (lower picture) $20




7. Stock LS3 pushrods, missing 1. $30



10. A single stock pressed fit rod. $10



12. Driver's side Valve Cover with bolts. $20 I have four additional bolts also.



18. 6.0 exhaust manifolds. If you're good enough to make a turbo fit you should be able to make an EGR blockoff plate. $30



As with any used part for sale, I will entertain offers also. I can ship anything anywhere on your nickle and the paypal bump would be appreciated. PM is the best way to contact me.

1. Brand new complete set of valves and springs for a pair of L92 heads. Intake valves, exhaust valves, LS6 springs, retainers and keepers, everything (not pictured yet). Buy a set of bare heads and save a bunch. $150 SOLD

2. Heads are no longer available. I have a complete set of LS3 springs and retainers. $40 SOLD

4. Rods and pistons from the an LS3 motor. I have six. $60 SOLD

8. From a 6.0 motor, the injectors and rails. $15 SOLD

9. From the same 6.0 the pushrods, rockers with bolts, and stands (not pictured) you can have the lifters which are not in bad shape just need cleaning. $50 SOLD

11. Valley cover with gasket, knock sensors, and harness. $55 SOLD

13. New MLS LS1 Head gaskets. $50 SOLD

14. New LS1 Intake gaskets. $20 SOLD
15. New LS1 TB gasket. $10 SOLD
16. New cam retainer. $20 SOLD

 

Movin' on up.

 

Bump up for the day.

 

Last bump before Christmas.

 

Some things sold, some offers. Let's spend some Christmas money.

 

are the rockers and bolts from LS3 heads ??also injectors and rails??

 

15.00 shipped for the L92 rocker stands? if so I'll take them.

 

No, they are from a 6.0 liter iron block.

 

How many miles on the 6.0? Might be interested in the injectors/rails, rockers, pushrods and lifters depending on mileage.

 

Bister, PM sent.

 

Lots of inquiries. Next thing you know the item you need will be gone.

 

L92 valve set is gone. I have a buyer for the LS3 intake valves if someone wants the bare heads. Make an offer.

 

pmd you

 

how much for the bare heads

 

Bump up for what's left

 

PM sent

 

Nobody needs a couple of good oil pumps?