If anyone has a set of new, unused LS6 springs, shoot me a PM or post up!

Or if you know where to get them for less than $57 w/o shipping, PM me, that's the best price I have seen so far.

Thanks

 

i'll let you know something in a little bit

 

I have a set with retainers. 0 miles, 0ff a 2001 LS6 crate engine. Been packed in a plastic bag. $55.00 Shipped to the 48.
Tom Hall Pay Pal c5hall97@roadrunner.com
I just put them in a box and they are ready to ship.

 

After some research, looks like GM re-engineered them in 2004 due to spring failures in 02-03 Z06's, so for the peace of mind, I am leaning towards buying them new so I wouldn't have to worry about whether they are pre or post 04.

 

I have a set of the new design GM Z06 springs; $130 shipped! With locks and Retainers. Can't ship until Monday Jan 17th however due to bad weather. Classicrules

 

I would only need the springs, reusing the stock locks and retainers. Price shipped to 77056 for springs only?

 

Anyone else have some LS6 springs?

 

we have a couple sets sitting at the shop right now. None have more than 50k miles on them. pm me a price and I'll ship them out!

 

One set is off a 06 GTO and another set is off a 2005 CTS-v

 

Looking for a new set for peace of mind. Thanks though!

 

Just wondering, what setup are you using these in? Reason I ask: if "new" Is the make or break if they can handle the cam you are putting in there...you might want to look into an aftermarket spring, preferably a dual spring.

Just trying to help man!

 

LPE GT2-3. With springs, I would rather spend $20 more and know that I am the first one to use them. With used ones, you can never know for sure if the guy before you habitually fired his car up in 10* weather, then floored it down the street before the springs warmed up. I am sure in the vast majority of cases that isn't true, but better safe than sorry.

 

I can appreciate that. We've done 2 of the gt1 cams in otherwise stock internal ls3's and they have been excellent!

Good luck with it man!

 

Great to hear! Can't wait to get mine in and see what it does!

 

Check with Summit racing we bought a couple sets off of there a few months back and they were like 65.00 shipped if my memory serves me right.

Here is the link http://www.summitracing.com/parts/NAL-12499224/

 

i may have a brand new set in a few days. they will come with springs,locks,retainers,and the seals. $60.00 shipped

 

Sweet. Let me know if/when you get them, or if you don't so I can order them elsewhere

 

i'll try and let you know sometime today.

 

Sounds good

 

got a set coming off in a day or 2. engine was never in car, just broke in on stand 2004
ls6 springs, cam is coming, out push rods. retainers locks

will sell springs 80 shipped
pm me when ready