Category: Drivetrain
Price: $2500
Part Fits: 93-02 Chevrolet Camaro, 93-02 Pontiac Firebird
Location (State): OK
Item Condition: Used
Shipping Information: Item Can be Shipped
Engine: LS2/LS3/LS7/L92/LS9
LS Engine?: Fits LS Engine

I have a 9" narrowed 2" on each side for sale or just gauging interest. Richmond 3.89 gears with a full spool. The bearings are the moser big ford bearing. Moser plates so you use your stock brakes. Moser 31 spline axles. Backspacing is 5.5 for 15" wheels so you get that beautiful deep dish look. Also have a custom built body mount torque arm built with rod ends for adjustment. Rear end has 500 miles or less on it. VERY stout rear end. Only reason I am willing to part with it is I need one that is a little narrower and lighter. Absulutly no whine from the gears. Everything built by a local reputable chassis shop in Tulsa Oklahoma. Everything you need except wheels to upgrade the pos 10 bolt GM gave us. I would say this rear end is indestructible.

Driveshaft with correct u joint
Custom built body mounted adjustable torque arm
Rear end with only the best components
$2500

If you want it shipped you figure the cost. Zip is 74108 and I would guess around 180 pounds for everything to be safe.

 

Also wanted to add that Moser 3" NHRA lug studs are included and installed
Here is a picture of the rear installed in the car.

 

Bumpage

 

Is it narrowed 3" on each side or 3" total?

 

Narrowed 2 inches on each side which is 4 inches total. I changed the ad to reflect. Also as of right now the rear end is spoken for. I have a gentleman coming up Saturday to pick it up.

 

DOes it have ABS?

 

I will be picking it up thanks

 

Hey I tried calling you a little while ago an left a message on your machine. Sounded like one of the kids answered so don't know if u got it. Any way can't make it today I hit a damn deer that makes two in the past freaking month! Any way we had already talked about today being close on time so just give me a call. Also I want to go over a couple things with you. My rear that I have for parts has the sensor on the ring not sure if its the same but i think the ss I picked up has traction control so yours should work. Since it doesn't have a drivetrain not sure what to look for but thats what its going into.

 

So did this thing get sold or what?

 

Blown99 is coming up tomorrow to pick it up.

 

Rear end is sold. Thank you for the interest.

 

Thanks for being a stand up guy I can't wait to get this thing on the road

 

Hey I ran off and forgot the drive shaft but no big deal . Just give me the part number for the u joint thanks.