15x10, 15x3.5 prostars

Thread Tools
 
Search this Thread
 
Old Feb 2, 2011 | 07:40 PM
  #1  
subhumanzz's Avatar
Thread Starter
9 Second Club
iTrader: (46)
 
Joined: May 2006
Posts: 1,037
Likes: 0
From: Fredericksburg, VA
Default 15x10, 15x3.5 prostars

i have a set of prostars 15x10 w/ 7.5 backspacing and 15x3.5 w/ 1.75 backspacing. front tires are 165 radials, no rear tires. also will include 2 5/16" spacers that i used for the rear , mcgard shank lug nuts and front center caps. front tires are like new and no rash on any of the wheels. looking to get $650 for everything. willing to meet within a reasonable distance of 22405







Last edited by subhumanzz; Feb 2, 2011 at 08:01 PM.
Reply
Old Feb 2, 2011 | 08:44 PM
  #2  
608kZ28's Avatar
TECH Apprentice
 
Joined: Apr 2008
Posts: 392
Likes: 0
From: the race track
Default

how much grinding did you do on the rear calipers?
Reply
Old Feb 2, 2011 | 09:07 PM
  #3  
subhumanzz's Avatar
Thread Starter
9 Second Club
iTrader: (46)
 
Joined: May 2006
Posts: 1,037
Likes: 0
From: Fredericksburg, VA
Default

you do have to grind the rears. as far as how much i think it varies from car to car but with the spacer i didnt think it was to terrible.
Reply
Old Feb 3, 2011 | 04:30 PM
  #4  
subhumanzz's Avatar
Thread Starter
9 Second Club
iTrader: (46)
 
Joined: May 2006
Posts: 1,037
Likes: 0
From: Fredericksburg, VA
Default

t t t
Reply
Old Feb 3, 2011 | 05:01 PM
  #5  
MR01Z28's Avatar
Staging Lane
 
Joined: Dec 2009
Posts: 93
Likes: 0
From: Virginia
Default

Nice car, Hey I am new to wanting the drag set up lol Can I ask what springs you have on your car I like the way it sits. I have a 01 Z28 and it still has the stock spring I want to lower it but not sure what spring I want to lower it with. I am more wanting the front an inch lower the back can almost stay the same. I wouldn't mind getting them wheels from you i just dunno about the $ yet. But would like to know about your springs thanks in advance
Reply
Old Feb 3, 2011 | 07:16 PM
  #6  
subhumanzz's Avatar
Thread Starter
9 Second Club
iTrader: (46)
 
Joined: May 2006
Posts: 1,037
Likes: 0
From: Fredericksburg, VA
Default

Originally Posted by MR01Z28
Nice car, Hey I am new to wanting the drag set up lol Can I ask what springs you have on your car I like the way it sits. I have a 01 Z28 and it still has the stock spring I want to lower it but not sure what spring I want to lower it with. I am more wanting the front an inch lower the back can almost stay the same. I wouldn't mind getting them wheels from you i just dunno about the $ yet. But would like to know about your springs thanks in advance
stock springs in the rear and strange coilovers on the front.
Reply
Old Feb 3, 2011 | 07:32 PM
  #7  
byatescmco's Avatar
Staging Lane
 
Joined: Dec 2008
Posts: 81
Likes: 0
From: Abingdon, VA
Default

I thought 7.5 backspace was correct for these cars.... do you have to run spacers on the rear? is that safe for drag racing?
Reply
Old Feb 3, 2011 | 07:56 PM
  #8  
CamaroRacing12's Avatar
11 Second Club
iTrader: (5)
 
Joined: Apr 2007
Posts: 3,779
Likes: 3
From: Haverhill, Mass
Default

bump for a REALLY REALLY good deal!

and for everyone yes these are the correct size and correct backspacing prostars for 4th gen f-bodies.

(jus will save ya the time OP)
Reply
Old Feb 3, 2011 | 08:16 PM
  #9  
subhumanzz's Avatar
Thread Starter
9 Second Club
iTrader: (46)
 
Joined: May 2006
Posts: 1,037
Likes: 0
From: Fredericksburg, VA
Default

^^ Thanks.

I used the spacers on the rear because i am running a 325 radial on the rear and i wanted a little bit more room.
Reply
Old Feb 3, 2011 | 08:57 PM
  #10  
byatescmco's Avatar
Staging Lane
 
Joined: Dec 2008
Posts: 81
Likes: 0
From: Abingdon, VA
Default

Originally Posted by subhumanzz
^^ Thanks.

I used the spacers on the rear because i am running a 325 radial on the rear and i wanted a little bit more room.
i have a moser 9" that has been shortened 3" overall. i wonder what kind of issues i would have with these
Reply
Old Feb 4, 2011 | 03:30 PM
  #11  
subhumanzz's Avatar
Thread Starter
9 Second Club
iTrader: (46)
 
Joined: May 2006
Posts: 1,037
Likes: 0
From: Fredericksburg, VA
Default

Originally Posted by byatescmco
i have a moser 9" that has been shortened 3" overall. i wonder what kind of issues i would have with these
mine is stock width. you would want less backspacing. im guessing with 1.5" off both sides you would want a 6" back spacing on a 10" wide wheel.
Reply
Old Feb 5, 2011 | 11:45 AM
  #12  
bills98ta's Avatar
Staging Lane
iTrader: (14)
 
Joined: Jun 2008
Posts: 72
Likes: 0
From: St Thomas PA
Default

PM Sent
Reply
Old Feb 5, 2011 | 12:48 PM
  #13  
00SSog's Avatar
Staging Lane
iTrader: (1)
 
Joined: Jan 2008
Posts: 71
Likes: 0
From: virginia
Default

I will be more than happy to take those off your hands if you can wait until my tax return comes in, I live in va beach
Reply
Old Feb 5, 2011 | 01:34 PM
  #14  
608kZ28's Avatar
TECH Apprentice
 
Joined: Apr 2008
Posts: 392
Likes: 0
From: the race track
Default

like i said dude, hold onto these till the 19th and ill take em off your hands
Reply
Old Feb 5, 2011 | 06:16 PM
  #15  
CamaroRacing12's Avatar
11 Second Club
iTrader: (5)
 
Joined: Apr 2007
Posts: 3,779
Likes: 3
From: Haverhill, Mass
Default

Originally Posted by byatescmco
i have a moser 9" that has been shortened 3" overall. i wonder what kind of issues i would have with these
exactly what the OP said. i have a set with 6.5in BS and they stick out a lil bit but not too bad. i paid $500 shipped for just 4 rims, lugs, and spacers. then i paid about $150 for front tires. so this is A STEAL! They r the correct size and come with front tires.
Reply
Old Feb 25, 2011 | 08:42 AM
  #16  
biggriff's Avatar
On The Tree
iTrader: (3)
 
Joined: Jan 2010
Posts: 116
Likes: 0
From: Yorktown, Va
Default

i have a set of TT2's id be willing to trade, but there would have to be rear tires included??? let me know...
Reply
Old Apr 1, 2011 | 06:20 PM
  #17  
Clyde H Frasier Jr's Avatar
Staging Lane
 
Joined: Dec 2008
Posts: 52
Likes: 0
Default wtb

Willing to by the rims, if their still available. Will come to VA to get.
Reply




All times are GMT -5. The time now is 01:05 PM.