Category: Accessories
Price: $1
Part Fits: 93-02 Chevrolet Camaro
Location (State): TX
Item Condition: Used
Shipping Information: Item Can be Shipped
Engine: LS2/LS3/LS7/L92/LS9, LS1/LS6
LS Engine?: Fits LS Engine

Have way too much just sitting in my garage I am not going to use anymore. All parts are in Houston, TX, local pick-up always welcomed.



Made 43X RWHP with TFS heads and PatG cam (before tuning/tweaking) on my 00 ws6 with a4, 3700 stall, moser rear, and 3.73 gears.

Was put on my car at LMR, made 1 dyno pull to start tuning and rod bearing started letting go. So the cam has literally just 1 pull on it. Heads were bought used, they had 3.5K on them when I bought them. Dual springs are good to .650.

-TFS 220's milled to 59cc's -- SOLD

------------------------------------------------

Custom PatG Cam 226/230 .598”/.600” 113LSA +1 advance (basically as big as you can go with the 59cc heads and stock pistons) - 325 shipped








------------------------------------------------

AFR 225 Heads, SOLD!!!!!!!!!!!!!!!












--------------------------------------------------

Yella Terra 1.7 non-adj Rockers - 3.5K miles SOLD
---------------------------------------------------

NW 90mm TB Cable Driven F-body - SOLD
---------------------------------------------------

TrickFlow 7.5 hardened pushrods - SOLD
---------------------------------------------------


-NEW GM MLS HEAD GASKETS (was for my 00 ws6) - 50 shipped
---------------------------------------------------
-NEW GM HEAD BOTLS (again, for my 00 ls1) - 50 shipped

------------------------------------------------------
-LIKE NEW (1 dyno pull) on parts below

LS2 lifter trays - SOLD
LS7 lifters - SOLD

--------------------------------------------------------
-Various other little things like extra engine covers, throttle bodies, stock 16" camaro wheels (5 spoke and snow-flake), Nitrous bottles...
-LS1 block/crank with spun rod bearing (rods and pistons included if you want them)

I'll get pics and prices soon for the smaller stuff.

edit: the pushrods I have are TF 7.5, not sure if my PR's got switched at the shop or what but that doesn't seem right for a stock bottom end and 59cc heads. I adjusted the price on heads/cam pacage.

 

when you get a moment pm me a price on the lifter trays, ls7 lifters, and timing chain shipped thanks!

 

ok, I'm going to the garage later today to verify it's all there, I'll get back to with prices then.

 

How much for the head gaskets and head bolt set shipped to 95382?
The gasket stock ls1 bore/thickness and mls? Just let me know, thanks.

 

I'm in houston text me at 832 3859086.

 

how much for the ls2 trays, ls7 lifters, heads and cam swap gasket kit? shipped to 94080

 

What are you including with the TFS top end?? And if it includes a cam what are the specs on it? Thanks. Pics??

 

Interested in the LS2 trays, LS2 timing chain, & the cam swap gaskets.

PM a price shipped to 77627 please.

 

sup man pm me the best price for the rocker arms to 91367 thanks

 

ok, went to garage and some parts were MIA, not really sure what happened but they are not around. Head and cam swap gasket kits, ls2 chain are gone... I updated the list.

 

So???

 

90 shipped if you want both. Yes, stock ls1 bore/thickness and MLS.

 

just the heads and cam for that price, I was including push rods but those seem to be the wrong ones. Cam specs are posted in 1st post.

And for anyone who want pics please pm your phone # I will text them to you. Or I will have them posted later tonight or tomorrow.

 

trays and lifters 135 shipped, gaskets sets are missing.

 

Do you still have the stock ls1 intake manifold?

 

I forgot to look for that, didn't see it though. I will take it off until I find it.

 

Alright...

 

bump...

 

would you sell the cam by itself? I never got a response on that.

 

sorry, missed that. 325 shipped for cam itself.