Category: Engine - Power Adders
Price: $250
Part Fits: 93-02 Chevrolet Camaro, 93-02 Pontiac Firebird, Corvette, 04-06 Pontiac GTO, 04+ Cadillac CTS-V
Location (State): TX
Item Condition: Used
Shipping Information: Item Can be Shipped
Engine: LS2/LS3/LS7/L92/LS9, LS1/LS6
LS Engine?: Fits LS Engine

SOLD!! is my Cam I was going to use on my '02 firehawk.
Decided to go with something a little different. Cam only has about 1500 miles on it if that, it was pulled from a customers car that blew his tranny and decided to go bigger cubes motor along with new trans, wanted different cam set up Race Only.... Car ran mid to high 11's in a '02
6spd with stock heads...

Cam is an LG5x3 copy. 238/244-605/612-on a 114 XER lobes. This Cam will work without flycutting on stock ls1 or stock ls2 heads....sell $250.00 includes shipping. thanks for looking, PETE

SOLD<SOLD[/COLOR][/COLOR]

 

Sounds like a nice cam.. Mid 11's on motor?

 

Yes, car ran mid to high 11's on motor.. put down like 410-420 to the wheels or near, i dont remember exactly.... The car did have a fast intake setup, but with stock 241 heads.....

 

what's the power curve of a cam this size?

 

I believe from around 3200 - 7000 rpms, Car it was in pulled very hard from midrange to top end... Would work very well in an m-6 car or an A-4 with a bigger stall like 3600+...

 

may be intersted, trying to figure out how well this will work on a procharged m6, my car made 597rwhp but the cam is a motor cam in there right now, has 4:10's which make up for the sluggishness down low, but only at 112mph in 4th at 6400 rpm's so im switching to a 3:73 but i need something around the 1800-6800 rpm range. but w a 114 ls this sounds like a decent blower cam.. but this car is weekend street driven, i have a race car already dont need to build something aggressive again lol

 

The larger exhaust duration lobe and wider lsa would or should work nice with a procharged setup or spray.. Playing with your gear set up will play an important roll.. Would be a killer on the hiway especially with 373's...

 

Bump - Somebody gotta want a nice cam and spring setup??? This stuff goes for over $950 if purchased new.. Ill pay the shipping to any where in the U.S.

 

Night time bump... Still got both items..

 

Night time bump, this is a great package deal!!! Ready to ship!!!!

 

Somebody got to be lookin for a fairly big cam and excellent set of springs?

 

Still have the cam?
If so email
Me ASAP davidd830@aol.com

 

pm sent....paypal ready for cam

 

Sorry guys my computer got a virus and i couldnt get on line all weekend, i will pm each of you back who are interested in cam, thanks Pete... p.s. I hate computers......lol

 

Pending sale to Black04silverado...

 

CAM is back up for sale...

 

Hey I got a buddy really interested in this cam.. Please PM me or give him a call at 859-420-4848.. Pretty sure he is ready to buy!! He is wanting to put it in his 05 cts-v

 

Sent u a pm, thanks

 

Cam and springs shipped for 250?? Or is that just cam?

 

Who ground the cam? Comp? I'm interested and in tx. Email me rlfDavin@gmail.com I respond fast, this comes with springs too?