hsw, n2o outlet, moser, ss hood, dynotune, patriot
Thread Starter
9 Second Club
iTrader: (46)
Joined: May 2006
Posts: 1,037
Likes: 0
From: Fredericksburg, VA
hsw, n2o outlet, moser, ss hood, dynotune, patriot have a few things for sale. everything is plus shipping and pp fees. larger items will be pick up only and the smaller things can be shipped.
slp lid- SOLD
kooks ory, maybe 100 miles on it at best. - $200
harris speed works bottle. one port in it will need either a plug or a gauge put in it as this is where i had the sensor for the pressure gauge listed below. 10 lb bottle in good shape. - $100
harris speed works bottle bracket. laser cut and mounts in between the two rear seats. - $125
harris speed works microedge controller. - SOLD
dynotune digital n2o pressure gauge. - $135
thunder racing, 7.425 pushrods. - $80
nitrous outlet 78mm plate, comes with the tb bracket and longer bolts, 50 - 250 jets. - SOLD
nitrous outlet big show purge, you will need a new piece of tubing. - $80
nitrous outlet fbody intake brackets for their hardline kit. - $40
nitrous outlet fuel and n2o solenoids.- $150
nitrous outlet all in one solenoid bracket. - $40
nitrous outlet hardline kit for ls6/ fast 90 setup for the 78mm plate. - $25
patriot stage 2 cnc ported 243's, 2.02 & 1.57 valves, assembled with patriot dual gold springs, springs have around 100 miles on them,, also new viton seals were installed at the same time. - SOLD
moser 12 bolt, eaton posi, 4.11 gears, 33 spline axles (have some surface rust and was told it could be cleaned up with mineral wool), believe its a 3 channel set up, frshley blasted and painted, also has moser aluminum stud girdle/cover. - SOLD
oem ss hood, rally red, has some chips but nothing terrible, i give it an 8 of 10
- SOLD
ls6 shortblock, needs cam bearings, 85k, flycut pistons, pick up item. - SOLD
will be getting pics up shortly.
slp lid- SOLD
kooks ory, maybe 100 miles on it at best. - $200
harris speed works bottle. one port in it will need either a plug or a gauge put in it as this is where i had the sensor for the pressure gauge listed below. 10 lb bottle in good shape. - $100
harris speed works bottle bracket. laser cut and mounts in between the two rear seats. - $125
harris speed works microedge controller. - SOLD
dynotune digital n2o pressure gauge. - $135
thunder racing, 7.425 pushrods. - $80
nitrous outlet 78mm plate, comes with the tb bracket and longer bolts, 50 - 250 jets. - SOLD
nitrous outlet big show purge, you will need a new piece of tubing. - $80
nitrous outlet fbody intake brackets for their hardline kit. - $40
nitrous outlet fuel and n2o solenoids.- $150
nitrous outlet all in one solenoid bracket. - $40
nitrous outlet hardline kit for ls6/ fast 90 setup for the 78mm plate. - $25
patriot stage 2 cnc ported 243's, 2.02 & 1.57 valves, assembled with patriot dual gold springs, springs have around 100 miles on them,, also new viton seals were installed at the same time. - SOLD
moser 12 bolt, eaton posi, 4.11 gears, 33 spline axles (have some surface rust and was told it could be cleaned up with mineral wool), believe its a 3 channel set up, frshley blasted and painted, also has moser aluminum stud girdle/cover. - SOLD
oem ss hood, rally red, has some chips but nothing terrible, i give it an 8 of 10
- SOLD
ls6 shortblock, needs cam bearings, 85k, flycut pistons, pick up item. - SOLD
will be getting pics up shortly.
Last edited by subhumanzz; Jul 2, 2011 at 11:34 AM.
Trending Topics
Thread Starter
9 Second Club
iTrader: (46)
Joined: May 2006
Posts: 1,037
Likes: 0
From: Fredericksburg, VA
Thread Starter
9 Second Club
iTrader: (46)
Joined: May 2006
Posts: 1,037
Likes: 0
From: Fredericksburg, VA