FS: WS6 wheels, 42 lb injectors, whisper lid
Thread Starter
TECH Enthusiast
iTrader: (17)
Joined: Mar 2007
Posts: 575
Likes: 0
From: Alexandria, VA
FS: WS6 wheels, 42 lb injectors, whisper lid Hey everyone I am trying to fund my new project so I have some things that I would like to get rid of.
-Vengeance Ported Fast 92 MM Intake Manifold with a Big Mouth 92 MM Throttle Body. The Intake is painted black, prolly could use a new coat. The paint job and porting was done from a previous owner so don't have paperwork on it. SOLD
- FTP 104 mm lid. I bought from someone on here, never installed still looks brand new. Going a different route I think and just need the money. SOLD
- Stock 5.7 LS1 aluminum block out of my 2000 WS6. Comes with block, stocks heads, injectors, Rapid Dominator 2 Camshaft, PRC springs, Moly Rods, etc. No intake bolts or TB. SOLD
- Bosch 42 lb injectors. Bought them used and never even used them. Low miles on them, look awesome. $250 shipped.
- Aftermarket Lid. It is the Whisper Lid (thanks for doing the research). Says LS1 in red on it and it's black. SOLD
- Stock MAF. Pretty self explanatory haha, still on the car but can be pulled off if someone really needs. $100
- Stock Struts all the way around. The front Struts have the stock springs to go along with them, they are all actually in pretty good shape. $200
- Stock Ebony Passenger Seat, pretty mint condition. No tears wear or really anything at all. $150
- Stock 2000 WS6 Hood. In really good condition. Not shipping, prefer pick up only!!! SOLD
-Stock 2000 WS6 Wheels with tires on all 4 with good tread and all lugs as well. $600
Will have more things being listed later as I pull them off the car. All prices are obo and do not including shipping. Thanks for looking!!
-Vengeance Ported Fast 92 MM Intake Manifold with a Big Mouth 92 MM Throttle Body. The Intake is painted black, prolly could use a new coat. The paint job and porting was done from a previous owner so don't have paperwork on it. SOLD
- FTP 104 mm lid. I bought from someone on here, never installed still looks brand new. Going a different route I think and just need the money. SOLD
- Stock 5.7 LS1 aluminum block out of my 2000 WS6. Comes with block, stocks heads, injectors, Rapid Dominator 2 Camshaft, PRC springs, Moly Rods, etc. No intake bolts or TB. SOLD
- Bosch 42 lb injectors. Bought them used and never even used them. Low miles on them, look awesome. $250 shipped.
- Aftermarket Lid. It is the Whisper Lid (thanks for doing the research). Says LS1 in red on it and it's black. SOLD
- Stock MAF. Pretty self explanatory haha, still on the car but can be pulled off if someone really needs. $100
- Stock Struts all the way around. The front Struts have the stock springs to go along with them, they are all actually in pretty good shape. $200
- Stock Ebony Passenger Seat, pretty mint condition. No tears wear or really anything at all. $150
- Stock 2000 WS6 Hood. In really good condition. Not shipping, prefer pick up only!!! SOLD
-Stock 2000 WS6 Wheels with tires on all 4 with good tread and all lugs as well. $600
Will have more things being listed later as I pull them off the car. All prices are obo and do not including shipping. Thanks for looking!!
Last edited by 00T/AWS6; Aug 30, 2011 at 08:39 AM.
).
Thread Starter
TECH Enthusiast
iTrader: (17)
Joined: Mar 2007
Posts: 575
Likes: 0
From: Alexandria, VA
touche!!!! thanks yea it's that lid exactly. Thanks for the info man.
Nope nothing wrong with the LS1, still runs great. There is a good deal on a local 408 so figured if I can sell the motor then i'll upgrade to that now while the car is apart.
Nope nothing wrong with the LS1, still runs great. There is a good deal on a local 408 so figured if I can sell the motor then i'll upgrade to that now while the car is apart.
