An opportunity has come up for me that i cannot pass up so my kit is up for sale.
I do not want to break up the kit.
Here is what is included.

ATI D1-SC head unit, Single fan that comes with the kit, Threaded rod to hold J-Bracket in place, and Radiator shroud. Paid $4250 for this kit with the stock twin Intercoolers.

Steel J-Bracket that holds Blower for no flex compared to the supplied Aluminum bracket sent by ATI $200 extra

SDCE Spring Tensioned 8 Rib Setup.
7.25" crank pulley and 3.4" blower pulley. 11 psi on Built motor And 3.3" blower pulley
90MM idler
Spring Tensioner
Extra bracket support $700

FMIC
OBX IC
3" inlets and outlets
Bracket built into front bumper support
3" Stainlees piping with mandrel bends
Tial 50MM BOV Flange on pipe but no BOV.. Sold to switch to a Vortech Mondo (Have new Flange for MONDO though)
High Temp Silicone 3" couplers, 4" to 3.5" transitions, and 3" to 3.5" transitions, and all T-Bolt clamps to assemble the kit. $1200
ATI Install manuel included.
If bought seperate would total $6110 + shipping and labor to do FMIC

Kit needs to go as soon as possible
asking *(EDIT PRICE LOWERED)*$4600 shipped or best offer

If any questions PM me to ask or PM for my home phone number.
This is also posted in the FS section here.
https://ls1tech.com/forums/showthrea...81#post2070581





Thanks
Kyle

 

Here we go again
J

 

 

Stop it you guys ha ha .... Thanks guys.
Kyle

 

Lucky dog tho Won't try to sway you from it this time, all the best buddy and I hope it works out.
J

 

come on dude, you gotta tell us what your next plans are.

Otherwise I'm going to start calling you Pro Stock John, since you seem to sell combos before maxing them out first

 

and

 

I cant let the cat out of the bag just yet...... and dont call me PSJ Please................................. or PSJ jr ha ha alright some one make an offer i am flexable.
Kyle

 

Good luck with your next endeavor.. if you decide to sell your FMIC piping Ill take it. Will need it soon though, lemme know.

 

O my, what are you doing now?

 

It will be fun i can tell ya that much..........
Kyle

 

Give me a cal if you care to share details

 

Again... If u are selling the FMIC separate send me a PM

 

IF it was only a larger charger system (something like an F1R or F2) I'de be all over it!

 

How much HP you wanting to make??? Synergy Motorsports made 687rwhp with the same cubes as me with only 13psi of boost with a 3.7" blower pulley.... i have a 3.4" and a 3.3"
Kyle

 

I have a sotck block so I would need to down the boost for now. What would this with the smallest boost push on my stock block? If so I am really interested but i need tyhe kit to be complete or what else would i need? Looking to buy really soon, but i dont have a welder. Please PM me with what all I would need since I am just gonna keep my car and mod it out. Thanks

 

I wouldnt run over 8 psi on a stock motor...... The pulleys i have would be to small but the two i have you could sell for 440 apiece and recoupe the price to buy 1 new bigger pulley from ATI ($80) The only other thing you would need would be the BOV itself. The flange is still on the pipe from Tial. I was going to switch to a Vortech... so it should be under $200 for sure. Ill shoot you a Pm when i get home..... im at work right now.... Do you have messenger?? If so shoot me your screen name.. i have AIM and MSN.
Kyle

 

Price lowered $4600 shipped or best offer
Kyle

 

message on ls2.com sent left.

EDIT: PM Sent also

interested... majorly.

Thanks

 

Replied to your PM
Kyle