FS: MP T70 0.68 T4 housing, TiAl 40mm WG
FS: MP T70 0.68 T4 housing, TiAl 40mm WG Was going to do a custom rear mount, but it's not in the cards. So turbo and wastegate are for sale. Both are new and unused, they've just been used for mockup.
Turbo is a Master Power T70 with a T4 undivided 0.68 A/R housing
The TiAl wastegate is the 40mm model, and comes with a 10psi spring. I also have a 5.7psi spring that I will throw in for $25 extra if you want it.
Looking to get $500 for the turbo, $325 for the wastegate ($350 if you want the 5.7psi spring). Both prices include shipping. If someone wants to buy both the turbo and wastegate I'll knock another $25 off the total and let them go for $800. I'll do paypal no problem. All I ask is that if you want to use a CC you cover the 3% they steal.
Feel free to PM me with questions.
Turbo is a Master Power T70 with a T4 undivided 0.68 A/R housing
The TiAl wastegate is the 40mm model, and comes with a 10psi spring. I also have a 5.7psi spring that I will throw in for $25 extra if you want it.
Looking to get $500 for the turbo, $325 for the wastegate ($350 if you want the 5.7psi spring). Both prices include shipping. If someone wants to buy both the turbo and wastegate I'll knock another $25 off the total and let them go for $800. I'll do paypal no problem. All I ask is that if you want to use a CC you cover the 3% they steal.
Feel free to PM me with questions.
I don't know what the MM of the compressor wheel is without taking off the housing and measuring it. It's the t70 listed on this page.
http://www.forcedinductions.com/productsMP.htm
p-trim wheel, .68 AR exhaust .70 AR compressor
http://www.forcedinductions.com/productsMP.htm
p-trim wheel, .68 AR exhaust .70 AR compressor
