All parts are used, but in good condition. I have pics upon request. All prices plus shipping.

Ford 9" Auburn posi unit 31 spline 260.00



**SOLD**MAFT w/custom mounting bracket (mounts to ABS module) 50.00**SOLD**

**SOLD**COMP 918 springs (Blue stripe) ~1500 miles 115.00 **SOLD**

**SOLD**Whisper ram air w/block off plate 65.00**SOLD**


*SOLD*99 LS1 heads with valves and seals, no springs or retainers. (good for cores, as one head was shaved twice. The other is untouched. Don't ask)*SOLD* 80.00

*SOLD*K&N filter 15.00*SOLD*

*SOLD* TNT Power ring 50.00*SOLD*

**SOLDTNT F2 nitrous kit 390.00-main feed line **SOLD**

*Sold* COMP titanium retainers (have scratches on the top from replacing springs) 100.00 *Sold*

*Sold*SVO 30lb injectors 140.00*Sold*

*Sold*NX bottle heater 130.00 *Sold*

*Sold*DynoTune digital pressure guage 75.00*Sold*

*Sold*NX nitrous switch panel 40.00 *Sold*

*Sold*NOS remote bottle opener 75.00 **Sold**


*sold*MTI clear lid 65.00 *sold to LS1_SS*

*Sold*SPEC stage 3 Gen 1 w/carbon pads, flywheel, new throwout bearing, ARP flywheel bolts. 150.00 (SPEC checked it out,reset adjusters and resurfaced, balanced flywheel and pressure plate together) *Pending sale to 2000bean*

*Sold*ASP underdrive pulley 125.00*Sold*

*Sold*Hardened 7.4" pushrods 45.00 *Pending sale to 2000bean*

*Sold*Jet Hot 1 ¾” headers w/emissions have some rust on the bottom 225.00*Sold*

*Sold*10 bolt rear w/axles, 3.42 gear stock posi. no backing plates, reluctor rings, or cover Sold

 

could you send some pics of the headers to lsky33@tampabay.rr.com? is it only surface rust?

 

pm sent

 

pm sent also

 

So the rear is 4 channel (Traction control and ABS), it just needs my axles w/ reluctor rings, backing plates and cover to run? How many miles? Any problems? How much w/ shipping to 61755. I'll take it if it is what I need.

 

PM sent....

 

Bump for a good seller.

 

check pm i called dibs on a few items and can send payment when ready

 

i'll take the rear if it has a torsen posi and can come pick up

 

If all will fit a 2000 Z28, pics please.... footballstu85@pldi.net
Thanks
Cody

 

is the ASP underdrive pulley the newer certified one? if so and it's not sold yet, i call dibs.

 

It is not a new one, I have had it for about 3-4 years.

 

I think I have answered everyone's PMs I will answer any more in the morning.

Thanks,
Kevin

 

Does the bottle opener come with everything?

 

Sorry, I missed this. Clutch and pushrods are sold. As it stands right now you are first in line for the springs and retainers, second in line for the injectors, and fourth in line for the pulley.

I will get pics sometime hopefully this weekend.

Thanks,
Kevin

 

can I get some pics of the posi? johnnys98ta@aol.com

 

I will take the NX switch panel. Email me a price with shipping included to sited122@yahoo.com and i will send out the money right away.

 

Put me inline for pulley too... if it makes it that far PM me. Thanks Zac

 

OK, I think I have answered all PMs. I am going to start pulling most of the nitrous stuff off this morning and taking pics when I am done. I am also going to remove eveything that I can that will not keep me from moving the car. When I get it back outside and get a clear day (maybe tomorrow) I will start pulling everything else off.

I am trying to be fare and keep it as a first come basis as long as I have a reply on when the payment is sent within a reasonable time.

I may also sell to anyone local to keep from having to ship stuff.

Thanks,
Kevin

 

You are 2nd in line.

Kevin