All parts are plus shipping and I guarantee them to be in good condition.


LS1 motorsports air lid that has been drilled for a dry kit. It has some cosmetic blemishes and a crack at the inlet neck. I glued it back together and it is still fully functional. 40.00

Nitrous line shut-off hand valve. This closes the nitrous line to prevent the line from discharging and wasting nitrous while changing bottles. I’m not sure what brand, but it is brand new. It is the –4 on one side and -6 on the other. 45.00

Stock cam (99 SS) with 45K miles 20.00

Stock lifters 88K miles 15.00

Stock torque arm. 15.00

Stock air box 15.00

Stock 6 speed shifter 40K miles, without **** 20.00

Stock upper panhard bar. 15.00

Stock lower panhard bar. 15.00

LS1 intake with about 45K miles. 45.00 **Sale Pending

Stock fuel rail. The Schrader valve threads are stripped, but the external threads are fine. I had a fuel line for my nitrous on the end of it. 20.00 **Sale Pending

**SoldStock 99 injectors 88K miles. 15.00**Sold

**SoldSLP Dual/Dual with no tail pipes or tips. The I-pipe has been cut into 2 sections. 90.00 **Sold

**SoldSLP loudmouth tail pipes without tips 20.00**Sold

**Sold Stock throttle body (with no sensors) from a 99 SS with 88K miles. The idle hole was drilled for a 224 cam, but it just barely oversized. 40.00**Sold

**Sold Stock Lower control arms 15.00**Sold

**Sold Stock 99 exhaust manifolds with cats. It was only cut on one side before the y-pipe. 65.00**Sold

**Sold AIR block off plates with used gaskets. The were not used long and I misplaced them while tracking down a bad O2 problem. 7.00 Sold**

**Sold Ford 9” Auburn Pro Series posi unit. I will include a noisy 3.89 gear with good bearings (carrier and pinion) for free. I did not have it in for very long before I decided I needed a gear change and wanted to try a spool at the same time. 150.00**Sold


I will try to have pics by tomorrow. Please do not PM me, send all questions and comments to silverslayer99@comcast.net

Thanks,
Kevin

 

Dibs on the block off plates.

 

I already have a sale pending, but if it falls through I will let you know.

Thanks,
Kevin

 

Hey, lemme know about the shipping for the posi/gears to 60435, and a way to pay for it, I have pay pal..... just send me a pm....
Thanks

Tim

 

Sent PM for shipping

Kevin

 

wanna sell just the poly torque arm mount? $10?

 

You have a PM

 

Ttt...

 

I am also open to offers/package deals.

Kevin

 

Back up!

 

Any pics of the exhaust? How many pieces has it been cut into?

gtatony@comcast.net for the pics

thanks!

 

Pics sent.

To the top

 

Come on, someone has to need some of this.

 

browse the WTB secton or add the WTB as an RSS feed (if you use Firefox as a browser) then you can quickly get updates when ever you open your browser

D

 

can i get some pics of the airbox to qcworm2002@yahoo.com

 

Got the pics, I'll let you know

 

To the top

 

pm sent on a couple of items.

 

Sent one back.

 

back up