FS: TSP 231/237 Cam, Pushrods, Ported Oil Pump

 
Thread Tools
 
Search this Thread
 
Old Aug 14, 2005 | 01:14 PM
  #1  
SupahRich's Avatar
Thread Starter
TECH Apprentice
iTrader: (14)
 
Joined: Apr 2002
Posts: 336
Likes: 0
From: High Point, NC
Default FS: TSP 231/237 Cam, Pushrods, Ported Oil Pump

How's it going guys? I've had these items stored in my closet for months and months now. I finally realized that I won't be getting around to install the cam this year. Maybe one of you guys will be able to make better use of them. The items are in excellent condition, approx 2,000 miles on the setup.

TSP 231/237 .598/.595 112LSA Cam - $250 shipped

TSP 7.4" Chromoly Pushrods - $70 shipped

ARE Ported LS6 Oil Pump - $75 shipped <-- Sold to CoronaL.

Will sell all of the above as a packaged deal for $375 shipped

Contact me at admin@supahrich.com PayPal is preferred for instant payment and provides security for both parties (Please add 2% for E-bay fees, I'll cover the other 1.5%). I have tons and tons of references on both here and CamaroZ28.com for the thousands of dollars I've spent and sold on the boards. I have 100% rating on E-bay, mysticteal_95_v6 is my userid there.

The heads have been spoken for, if payment is not received by this weekend as promised... I will re-post on boards with photo's.

I also have a set of used, complete Patriot Performance Stage II heads ('98 Perimeter Bolt style). I have a set of perimeter bolt valve covers to include with them if someone like myself with the '99+ style center bolts were interested in converting. They do have carbon buildup on them where they are used but a quick clean up would take care of that. One head has been disassembled (Was going to send heads off to be hand ported) and the other is still fully assembled. I'm looking to get $650 shipped for them as they sit. If someone was interested in the heads/cam/oil pump/pushrod combo... I will let it all go for $1025 shipped. Pretty much an entire heads/cam package, only thing needed would be a timing chain of your choice and the gaskets.

I can take photo's of any/all of the items above.

Last edited by SupahRich; Aug 21, 2005 at 04:28 PM.
Old Aug 14, 2005 | 01:22 PM
  #2  
jlwade's Avatar
Teching In
 
Joined: May 2005
Posts: 16
Likes: 0
Default

hey there, about the cam was the idle pretty good? where did it feel to make power at? anything else you can tell me about it i would appreciate, also im in southern maryland where at in virginia are the parts?
Old Aug 14, 2005 | 03:06 PM
  #3  
SupahRich's Avatar
Thread Starter
TECH Apprentice
iTrader: (14)
 
Joined: Apr 2002
Posts: 336
Likes: 0
From: High Point, NC
Default

I'm located in Southwest, VA, close to the NC/VA border. You should try a search here on the boards for "TSP 231/237" you'll find A LOT of helpful info about this cam... it is very popular. Sounds mean and runs pretty damn hard.
Old Aug 14, 2005 | 03:24 PM
  #4  
ATLHwyRacer's Avatar
TECH Apprentice
iTrader: (5)
 
Joined: Jul 2005
Posts: 383
Likes: 0
From: A-Town GA
Default

You have a pm
Old Aug 14, 2005 | 06:19 PM
  #5  
CoronaL's Avatar
On The Tree
iTrader: (6)
 
Joined: Jul 2005
Posts: 179
Likes: 0
Default

dibs on pump
pm sent on cam
Old Aug 14, 2005 | 08:23 PM
  #6  
JoeyAnderson's Avatar
10 Second Club
iTrader: (20)
 
Joined: Feb 2005
Posts: 1,340
Likes: 0
From: Winston-Salem, NC
Default

Ever get any dyno numbers out of the heads?
Old Aug 15, 2005 | 06:36 AM
  #7  
WKMCD's Avatar
TECH Junkie
iTrader: (2)
 
Joined: Mar 2005
Posts: 3,416
Likes: 2
From: Northern VA
Default

PM Sent
Old Aug 15, 2005 | 07:22 AM
  #8  
SupahRich's Avatar
Thread Starter
TECH Apprentice
iTrader: (14)
 
Joined: Apr 2002
Posts: 336
Likes: 0
From: High Point, NC
Default

Hey guys... I updated the list to reflect items that have been sold. CoronaL - I will be sending you a PM shortly about the pump.

I tried to reply to most of the PM's I received since yesterday, I apologize if I didn't get around to replying to you. This stuff sparked interest FAST!
Old Aug 15, 2005 | 09:52 AM
  #9  
CoronaL's Avatar
On The Tree
iTrader: (6)
 
Joined: Jul 2005
Posts: 179
Likes: 0
Default

$ sent via paypal for pump

hope that local guy doesn't buy cam b/c I'm greedy and I want it HEHE!
Old Aug 21, 2005 | 04:29 PM
  #10  
SupahRich's Avatar
Thread Starter
TECH Apprentice
iTrader: (14)
 
Joined: Apr 2002
Posts: 336
Likes: 0
From: High Point, NC
Default

The cam and pushrods are available again, the local guy didn't come through on payment for them.
Old Aug 26, 2005 | 10:52 AM
  #11  
Anniversary "Z"'s Avatar
12 Second Club
iTrader: (26)
 
Joined: Sep 2004
Posts: 680
Likes: 0
From: Liberty, MO
Default

pm sent on pushrods
Old Aug 31, 2005 | 01:28 PM
  #12  
CoronaL's Avatar
On The Tree
iTrader: (6)
 
Joined: Jul 2005
Posts: 179
Likes: 0
Default

got pump, haven't opened but pleasure to do business with
Old Sep 7, 2005 | 03:32 PM
  #13  
TSDuke's Avatar
On The Tree
 
Joined: Feb 2004
Posts: 156
Likes: 0
From: Fayetteville, NC
Default

Pushrods still available?
Old Sep 15, 2005 | 11:13 PM
  #14  
jtmiller92's Avatar
11 Second Club
15 Year Member
iTrader: (74)
 
Joined: Sep 2005
Posts: 202
Likes: 0
From: Nicholasville, KY
Default

cam still available??
 




All times are GMT -5. The time now is 03:06 AM.