Fs: Brand new Ls2 intake w rails 250 shipped
09-06-2005, 12:45 AM
#1
TECH Addict
Thread Starter
iTrader: (36)
Join Date: Apr 2002
Location: Murphy, Tx
Posts: 2,526
Likes: 0
Received 0 Likes
on
0 Posts
Fs: Brand new Ls2 intake w rails 200 shipped SOLD!The intake is brand new. It has the little nipple on the back broken off. Shouldn't hinder performance if you just plug it up. Check the pics attached.
100 bucks shippedw/insurance. paypal add the 3% FEE.
ls2 rails and o rings have been sold.......
Universal Direct Port
I also have a direct port kit from cold fusion. it's there cfn-400 kit. no bottle and no main line. it's the universal direct port kit. can be seen here:http://www.coldfusionnitrous.net/directport.html
It's the first one at the top. I also have pics attached of it.
450 shipped w/insurance. paypal add the 3% FEE.
I can also take check or money order. Just gonna hold it till it clears though.
If you have any question Pm me or email me at srunlay@comcast.net
Thanks for the look.
Srun
BTW I lowered the prices some. needs to go.
100 bucks shippedw/insurance. paypal add the 3% FEE.
ls2 rails and o rings have been sold.......
Universal Direct Port
I also have a direct port kit from cold fusion. it's there cfn-400 kit. no bottle and no main line. it's the universal direct port kit. can be seen here:http://www.coldfusionnitrous.net/directport.html
It's the first one at the top. I also have pics attached of it.
450 shipped w/insurance. paypal add the 3% FEE.
I can also take check or money order. Just gonna hold it till it clears though.
If you have any question Pm me or email me at srunlay@comcast.net
Thanks for the look.
Srun
BTW I lowered the prices some. needs to go.
Last edited by red90cobra; 09-26-2005 at 01:57 PM.
09-16-2005, 01:28 PM
#4
TECH Addict
Thread Starter
iTrader: (36)
Join Date: Apr 2002
Location: Murphy, Tx
Posts: 2,526
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by ls1290
Would you take $75 shipped for the intake since it will have to be repaired?
Keith
Keith
100 and it's urs add like 3 bucks for paypal
09-16-2005, 11:49 PM
#7
TECH Addict
Thread Starter
iTrader: (36)
Join Date: Apr 2002
Location: Murphy, Tx
Posts: 2,526
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by greentahoe
Will this fit on my truck? If so I want dibs. Is this the intake with the 90mm opening? Is there anything else I would need to put this on my 408?
Trending Topics
09-17-2005, 07:52 AM
#8
TECH Addict
iTrader: (2)
Join Date: Feb 2004
Location: Tampa, Fl
Posts: 2,784
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by red90cobra
you will need the ls2 fuel rails and 90mm tb.
Sorry for all the questions.
09-17-2005, 08:37 AM
#9
TECH Addict
Thread Starter
iTrader: (36)
Join Date: Apr 2002
Location: Murphy, Tx
Posts: 2,526
Likes: 0
Received 0 Likes
on
0 Posts
yes the tpis tb bolts right up. You just would have to make a custom bracket to hold the cable in place. there's not much more then 65lb injectors that are high imps. you would have to get an injector driver to go to low imp then you can run 65+ injectors. the fuel rails are suppose to be different than the ls1 fuel rails as far as injector angles. getting this for 100 bucks shipped is a great deal. that's less than half what i got it for. I might still have the rails. Waiting on payment till tonight then the whole thing is for sale again. thanks. let me know if you want the intake.
09-17-2005, 09:04 AM
#10
TECH Addict
iTrader: (2)
Join Date: Feb 2004
Location: Tampa, Fl
Posts: 2,784
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by red90cobra
yes the tpis tb bolts right up. You just would have to make a custom bracket to hold the cable in place. there's not much more then 65lb injectors that are high imps. you would have to get an injector driver to go to low imp then you can run 65+ injectors. the fuel rails are suppose to be different than the ls1 fuel rails as far as injector angles. getting this for 100 bucks shipped is a great deal. that's less than half what i got it for. I might still have the rails. Waiting on payment till tonight then the whole thing is for sale again. thanks. let me know if you want the intake.
I may be interested in the fuel rails too. send me a pm with payment instructions. BTW what will I need to get the 65lb inj to fit in the rails? One last question
I want to bolt this up to my iron block 408, so all I need is the fuel rails, inj that will fit the LS2 rails, 90mm TPIS or Nick Williams..... and thats it?
Thanks alot
09-17-2005, 09:07 AM
#11
TECH Addict
Thread Starter
iTrader: (36)
Join Date: Apr 2002
Location: Murphy, Tx
Posts: 2,526
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by greentahoe
hell, Ill take the intake just for the free advice!! I may be interested in the fuel rails too. send me a pm with payment instructions. BTW what will I need to get the 65lb inj to fit in the rails?
One last question
I want to bolt this up to my iron block 408, so all I need is the fuel rails, inj that will fit the LS2 rails, 90mm TPIS or Nick Williams..... and thats it?
Thanks alot
I may be interested in the fuel rails too. send me a pm with payment instructions. BTW what will I need to get the 65lb inj to fit in the rails? One last question
I want to bolt this up to my iron block 408, so all I need is the fuel rails, inj that will fit the LS2 rails, 90mm TPIS or Nick Williams..... and thats it?
Thanks alot
and lower injector o rings. yes it'll fit a iron 408. 90mm tpis or nick williams will work.
sending pm
09-17-2005, 09:12 AM
#12
TECH Addict
Thread Starter
iTrader: (36)
Join Date: Apr 2002
Location: Murphy, Tx
Posts: 2,526
Likes: 0
Received 0 Likes
on
0 Posts
oh as far as injectors fitting the rail they fit the same way the rest of them do they slide right in. the mounting blocks keeps the rails down and the rails hold the injectors in place.
09-23-2005, 11:37 PM
#14
TECH Addict
Thread Starter
iTrader: (36)
Join Date: Apr 2002
Location: Murphy, Tx
Posts: 2,526
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by greentahoe
Intake is perfect! Thanks man, Do you have the rails up for sale again?