NX fogger w/complete stand alone fuel system
Thread Starter
9 Second Club
iTrader: (9)
Joined: Nov 2001
Posts: 570
Likes: 0
From: St. Charles, MO
Part Number: NX-80000EFI - $850 new
Here is a link to the kit: http://www.nitrousoutlet.com/outlet/...§ion_id=16
If you have any doubt about the condition the noids are in, NX will check them out and repair them (if needed) at no charge. The jets that are included are 100,150,200,250,300 - pending sale
Along with this kit I have the following upgrades to go with it:
2 fuel rails and 2 n2o rails - $270 new (the new ones have to be drilled and tapped, these are ready to go)
Soft nylon lines (easy to install) - $150 new
I also have a complete stand alone fuel system that includes:
Holley blue pump and regulator
sheet metal 1 gallon fuel cell
all steel braided lines and AN fittings to install
The fuel system would cost about $600 to build from scratch. I also have a Mallory window switch that goes with the kit.
I bought this from a fellow board member and have to decided to go a different route with my set-up. I never installed the system it's just been sitting in my garage. I have a 10# bottle that I will sell with it but it is a TNT bottle. If you don't want a different brand bottle I will knock $100 off the price and just keep it.
$1000 shipped or $900 shipped without the bottle
Here is a link to the kit: http://www.nitrousoutlet.com/outlet/...§ion_id=16
If you have any doubt about the condition the noids are in, NX will check them out and repair them (if needed) at no charge. The jets that are included are 100,150,200,250,300 - pending sale
Along with this kit I have the following upgrades to go with it:
2 fuel rails and 2 n2o rails - $270 new (the new ones have to be drilled and tapped, these are ready to go)
Soft nylon lines (easy to install) - $150 new
I also have a complete stand alone fuel system that includes:
Holley blue pump and regulator
sheet metal 1 gallon fuel cell
all steel braided lines and AN fittings to install
The fuel system would cost about $600 to build from scratch. I also have a Mallory window switch that goes with the kit.
I bought this from a fellow board member and have to decided to go a different route with my set-up. I never installed the system it's just been sitting in my garage. I have a 10# bottle that I will sell with it but it is a TNT bottle. If you don't want a different brand bottle I will knock $100 off the price and just keep it.
$1000 shipped or $900 shipped without the bottle
Last edited by DOC OTIS; Sep 17, 2005 at 01:23 PM.
Thread Starter
9 Second Club
iTrader: (9)
Joined: Nov 2001
Posts: 570
Likes: 0
From: St. Charles, MO
Originally Posted by smeshey
how bout $625 with bottle and fuel system and i pick it up ? I should be able to scrape toghether that cash
do you use vasoline?
Last edited by DOC OTIS; Sep 14, 2005 at 10:49 PM.
Originally Posted by smeshey
how bout $625 with bottle and fuel system and i pick it up ? I should be able to scrape toghether that cash
wish i had the 1k for this kit and didn't have my cold fusion. this kit is set up NICE!
hope ya sell it
Trending Topics
Thread Starter
9 Second Club
iTrader: (9)
Joined: Nov 2001
Posts: 570
Likes: 0
From: St. Charles, MO
wow............. no interest in a complete NX fogger rail system with soft lines minus the bottle for $625 to your door. This has gotta go somebody surely needs a killer n2o setup
I am interested. Please email me ramjudd@comcast.net
Pics of everything will be helpful. I will shoot you a very fair price as I need a stand alone direct port for my 436 solid roller. Thanks.
Robert
www.gen3motorsports.com
Pics of everything will be helpful. I will shoot you a very fair price as I need a stand alone direct port for my 436 solid roller. Thanks.
Robert
www.gen3motorsports.com
Originally Posted by DOC OTIS
I have pics I can email to anyone interested
Interested in the fogger kit less bottle.
Please email me pics - plewand@soflinks.com
Thanks, Perry


