Like new performance part's
Thread Starter
TECH Fanatic
iTrader: (2)
Joined: Dec 2002
Posts: 1,107
Likes: 0
From: Orange county n.y.
Like new performance part's Installed the 408 so here's a list of parts for sale
Absolute Speed STG 2.5 5.3L heads W/ Comp 977 springs 2.055- 1.575 valve's tit retainers all the good stuff! CNC'ed and hand finished. Less than 1K on them. Paid 2495 sell 1700.00 Shipped Have full flow sheet as well
Harland Sharp 1.7 RR also less than 1K on them. $295.00
Thunder Racing 7.4 chromemoly push rods $75.00 W/ 3k on them
Comp R lifters less than 1K on them $100.00
Texas Speed 231/237 cam 3k on it sell $225.00
MTI air lid $50.00 75mm
AFR 225 dual valve springs BRAND NEW .600 lift $100.00
Also set of SVO 30lb injectors 1K as well $200.00
Or make offer for whole long block minus oil pan and valve covers
Absolute Speed STG 2.5 5.3L heads W/ Comp 977 springs 2.055- 1.575 valve's tit retainers all the good stuff! CNC'ed and hand finished. Less than 1K on them. Paid 2495 sell 1700.00 Shipped Have full flow sheet as well
Harland Sharp 1.7 RR also less than 1K on them. $295.00
Thunder Racing 7.4 chromemoly push rods $75.00 W/ 3k on them
Comp R lifters less than 1K on them $100.00
Texas Speed 231/237 cam 3k on it sell $225.00
MTI air lid $50.00 75mm
AFR 225 dual valve springs BRAND NEW .600 lift $100.00
Also set of SVO 30lb injectors 1K as well $200.00
Or make offer for whole long block minus oil pan and valve covers
Last edited by destroyerSS; Oct 17, 2005 at 06:09 PM.
Trending Topics
Is that bad for a boosted motor? Thanks Shawn Yeah. Too little overlap bleeds off boost. We need a cam with a 114-117lsa to make the most of the pressure in the cylinders. Otherwise, the boost is wasted and ejected out of the exhaust valves since the overlap is short.
