I dont have time for this stuff any more...so most of it is going. Here is a partial list of items going. NO DIBS!!! First one to pay with cash gets the item. DO NOT send cash until you have checked with me.
The packages will be give one week to sell that way. Then I will start parting out individual items.

**update** too many people wanted individual items...so its a free for all. Ill seel everything individually as of today. Thanks.

Nitrous stuff

*NX MAximizer II with updated program for the true curve. Go to FJOracing.com for detials. Barely used. Only had it for 2 months. WORKS GREAT!! $640 new
*FJO wideband to be used for Maximizer with wideband sensor. Comes with cable to integrate directly to Maximixer $500 new
*Sensor for nitrous pressure for MAXII $91 new
*Automatic bottle opener for use with MAXII, not sure on new prices
*FJO AF gauge easily connect to wideband harness $127 new

Thats $1358+ for all new stuff without shipping. Ill sell the above items for an even $1050 shipped sold


More nitrous stuff

Now on EBAYhttp://cgi.ebay.com/ebaymotors/ws/eB...MESE%3AIT&rd=1
FAST 90MM intake with 90 MM TB and NX Direct port plumbed onto it with Aeromotive fuel rails. Intake is ported mildly. Also comes with the purge. Has been tested and works great. No electronics with TB. No nitrous bottles with DP. Does not include injectors. Ready to ship.




Dyno with DP and progressive controller.
[IMG][/IMG]

$2200+ shipping


Solid Roller stuff

*Comp 3/8 pushrods in 7.100 lenght for above combo $90 sold
*Futral solid roller cam 260/271 .731/.714 on a 114 lsa $250 sold
*Morel solid roller lifters, work great...excellent oil pressure $350 sold

*COMP/T&D shaft mount rockers, BEEFY! $725


*SHeetmetal Vlave covers....beautiful! Will throw in lines and catch can for breather setup...$425 sold




Misc stuff

* Harlan 2 step...$150 sold


*SLP underdrive pulley..barely used ....$175 Lowered to $150 and will throw in the main belt
*Meziere electric water pump with thermostat, black, some scratches works great very low miles....$375 lowered to $350

EXHAUST

*Kooks stainless 1 7/8 stepped to 2" into 4" collector necked down to 3 1/2
with velocity spike. EGT bungs welded in to primaries. No dents. $975 sold

*Custom true dual 3" exhaust with X pipe for above headers. HAs cutouts made with the flow priority for the cutouts..when open they are straight thru and 3.5". When closed it forces flow through the X pipe and 2 chamber flowmasters....$250 sold

*QTP 3.5 inch electric cutouts with switch....$200 sold

* Alltronics 8 egt datalogger. Will datalog many EGT runs and then DL to computer for review in graph form. Very sweet setup. $999 new. Sell for $700

Will sell all of the above for $2000



Stand alone fuel setup for nitrous

*Mallory 60FI fuel pump $145 new
*Mallory 650-4305 regulator $100 new
*Jazz 1 gaollon nitrous tank $120 new
*lines and unions in -8 $100+ new
*fule pressure gauge in regulator $20

Will sell the above for $350 shipped sale pending



Transmission stuff

* low milage T56 with NO issues. Shifts great. Rebuilt by a pro with all OEM parts. $1050 + shipping sale pending

* Barely used SPEC stage 5 clutch with Billet AMS flywheel, Has about 100 miles on it and it just made 3 all motor passes and 1 nitrous launch. Went 1.39 sixty foot. $475 + shipping sale pending

* clutch hydraulics...Cartek adjustable master, new style slave, McCloed AN fitting conversion on msaster and slave, high pressure lines with integral bleeder between, bleeder tool...$200 sale pending


* Pro 5.0 shifter cut down, shifter **** epoxied to short stick, regular leather ****...$130 sale pending

Buy all of the above for the $1855 and I will ship it free inside the US


I can get pics of all of this stuff. Preference will be given to people who want the package deals so I will give the packages time to sell like that. If you want individual items within a package PM me anyways and I will keep track by first come first served. But again...people wanting packages will be give priority.

Will also have HPE built 415 CI shortblock with Diamond nitrous pistons and hellfire rings, Eagle 4" crank and Callies Compstar Rods for sale soon
as well as TEA stage 3 LS6 heads with 2.08 intake valves. They will be up for sale when they are ready to be pulled in a few weeks.

 

Al, I'll take the hydraulics. Drop me a PM or an email at jhsformula@aol.com and I will have the check out to you asap.

Thanks!
Jason

 

Jason...I will give the packages one week to sell..then start to part them out individually. I have you down for the clutch hydraulics.

 

Pmed you on Rx about the stand alone fuel system.

 

Dibs on harlan 2 step, kooks and x pipe whats your paypal and send me the shipping price to 30265

 

Would kill for the headers but no cash right now. TTT for you.

 

PM sent on X-pipe setup

 

How many miles on the rockers?

 

Sent you PM on a few items.

Thanks, Perry

 

Man...this will be tough to keep track of...so bear with me people

The rockers have about 750 miles or so. Not much at all.

I will reply to all PMs sent so far. Thanks guys.

 

Bump for an awesome seller and a car that just plain hauls ***. These are all quality parts, from a good guy.

 

One more thing..do not send cash via paypal or any other method until we have completely hashed out the full price of all the items you want + shipping and have both agreed to that. Also please be sure to include paypal fees if you are paying with a method that takes fees out.

Thanks guys. Ill keep shipping prices very low.

 

BTW the rockers are 1.7 ratio

 

Consider the stand alone fuel system sold.

 

PM sent.

 

DSG has the stand alone fuel system


Boss man...PM returned

 

Do you have the 2 step still? Please email me at AlanSkora@hotmail.com and let me know either way as the subscription to this thread doesnt always work for me.

I have money in hand just waiting to find out where to send.

Please email me to let me know either way.

Thank you.

 

I did not get my PM returned.. Is the X-pipe sold?

 

Same goes for the clutch and flywheel.

 

Sorry Blown408...PM returned. I will also posy some pics of this stuff tonight.

Obrien...the clutch and flywheel is all you. If you want me to help you with an AN line conversion we can do your stuff.