Unmodded my car, lots of parts, lots of pictures
Thread Starter
Launching!
iTrader: (7)
Joined: Nov 2003
Posts: 222
Likes: 0
From: 3 miles south of Tel Aviv
The following parts are from my 2002 Trans Am WS6. I sold it recently with about 14K miles. Anyway the parts should fit all 1998 - 2002 Camaros and Firebirds, but a few items are Pontiac specific. Some things will fit ealier model years also. Most of this stuff was used less than 1,000 miles and they are all less than 2 years old. Some things were never used. Some items are in pairs/sets. The prices are negotiable and are all less than you would pay if you bought these things new today.
UMI shock tower brace with 4 washers, black
Sold and shipped to Frost
UMI short stick with 2 bolts and 2 lock-washers
Sold and shipped to mwill15
GMMG polished cat-back chambered exhaust system with clamps
Sold and shipped to 02redls1z
GMMG polished oval tips with clamps, pair
Sold and shipped to 02redls1z
Afterthoughts Auto clear front license plate cover, BLEMISHED, never used
Sold and shipped to nytmare1
GM carpet floor mats, black, set of 4, steam cleaned
Sold and shipped to Red91vette
Fumoto F107N oil pan drain valve with nipple, $25

GM Mobil-1 oil cap
Sold and shipped to barneygookle
GM Mobil-1 brushed metal sticker, never used
Sold and shipped to barneygookle
Thunder Racing MBA Firebird Gear Shift ****, black with engraved Phoenix bird, 2.25” diameter, no tail
Sold and shipped to Frost
Afterthoughts Auto windshield sunshade, used twice $28

Summit Racing McGard black chrome lug nuts, set of 20
Sold and shipped to 1QUIKWS6
GM Sunroof shades for inside of T-Top panels, pair, black, never used
Sold and shipped to barneygookle
I can assist with the installation of any of these things if wanted (and if you're local to me). Also if you're local to me we can work something out to save shipping.
Later I'll add more things when I find them...
UMI shock tower brace with 4 washers, black
Sold and shipped to Frost
UMI short stick with 2 bolts and 2 lock-washers
Sold and shipped to mwill15
GMMG polished cat-back chambered exhaust system with clamps
Sold and shipped to 02redls1z
GMMG polished oval tips with clamps, pair
Sold and shipped to 02redls1z
Afterthoughts Auto clear front license plate cover, BLEMISHED, never used
Sold and shipped to nytmare1
GM carpet floor mats, black, set of 4, steam cleaned
Sold and shipped to Red91vette
Fumoto F107N oil pan drain valve with nipple, $25

GM Mobil-1 oil cap
Sold and shipped to barneygookle
GM Mobil-1 brushed metal sticker, never used
Sold and shipped to barneygookle
Thunder Racing MBA Firebird Gear Shift ****, black with engraved Phoenix bird, 2.25” diameter, no tail
Sold and shipped to Frost
Afterthoughts Auto windshield sunshade, used twice $28

Summit Racing McGard black chrome lug nuts, set of 20
Sold and shipped to 1QUIKWS6
GM Sunroof shades for inside of T-Top panels, pair, black, never used
Sold and shipped to barneygookle
I can assist with the installation of any of these things if wanted (and if you're local to me). Also if you're local to me we can work something out to save shipping.
Later I'll add more things when I find them...
Last edited by David 2002 WS6; Apr 6, 2006 at 07:26 PM. Reason: Removed pictures of sold parts.
Trending Topics
I'll take the clear front cover (is it the 'blem' version or 'good' version - Afterthoughts offered both @ different $$)
Possibly the lugnuts - need to know exact P/N to check if they will work with my TTII's
Send me an email to jay442@msn.com to confirm they are still available and payment details...
TIA,
-Jay-
Possibly the lugnuts - need to know exact P/N to check if they will work with my TTII's
Send me an email to jay442@msn.com to confirm they are still available and payment details...
TIA,
-Jay-
Last edited by 1QUIKWS6; Nov 6, 2005 at 08:16 AM.
Thread Starter
Launching!
iTrader: (7)
Joined: Nov 2003
Posts: 222
Likes: 0
From: 3 miles south of Tel Aviv
Originally Posted by David 2002 WS6
Later I'll add more things when I find them...







Last edited by David 2002 WS6; Apr 6, 2006 at 07:25 PM. Reason: Removed parts not available anymore.
Thread Starter
Launching!
iTrader: (7)
Joined: Nov 2003
Posts: 222
Likes: 0
From: 3 miles south of Tel Aviv
Originally Posted by David 2002 WS6
GMMG cat-back chambered exhaust system with oval tips and clamps, $775
Originally Posted by RelentleZ
why is your gmmg exhaust priced so high? its 700 brand new from gmmg.
http://www.gmmginc.net/html/chamberedexhaust.html
Thread Starter
Launching!
iTrader: (7)
Joined: Nov 2003
Posts: 222
Likes: 0
From: 3 miles south of Tel Aviv
Originally Posted by 99Ws6TransAm
"Fumoto F107N oil pan drain valve with nipple, $25"
How exactly does this work? Im interested. Dibs if it works how i think it does.
How exactly does this work? Im interested. Dibs if it works how i think it does.
I'd recommend the Fumoto drain valve if you change oil yourself and if do it fairly often. I've got one on each of my cars.
Three things I need to point out.
- The Fumoto drain valve sticks out from the oil pan a little more than the OEM drain bolt. If your car has a really low suspension and it hits things often then there is a small chance you could hit something in the road, it could bother the Fumoto drain valve, and the oil pressure gauge would make you raise your blood pressure.
- The oil drains out more slowly because it has to pass through a smaller opening. I always rotate the wheels while the oil drains to help pass the time.
- The threads of the Fumoto drain valve extend slightly into the oil pan so the last few ounces of old oil won't drip out.
Mine is the good version. I'll take it out of the bag and try to take pictures
Now if you can get me the P/N of the lugs so I can check for compatibility we can make a deal on those (2) items (that is as long as they are still available).
BTW, nice pics of everything and the enlarge option - so many times there are no pics and they have to be requested (which if the seller would look at it from his POV - it just means they have to send 300 sets of pics- one set to every request
) Personally, I won't buy anything unless I see a pic of the ACTUAL item FS (not just an advertising pic from site) that way there's proof as to what the actual item I'm buying looks like.
Last edited by 1QUIKWS6; Nov 6, 2005 at 08:32 AM.
Thread Starter
Launching!
iTrader: (7)
Joined: Nov 2003
Posts: 222
Likes: 0
From: 3 miles south of Tel Aviv
Originally Posted by 1QUIKWS6
That's cool - in the blem version I think you can clearly see bubbles & imperfections in the plastic.
Now if you can get me the P/N of the lugs so I can check for compatibility we can make a deal on those (2) items (that is as long as they are still available).
BTW, nice pics of everything and the enlarge option - so many times there are no pics and they have to be requested (which if the seller would look at it from his POV - it just means they have to send 300 sets of pics- one set to every request
) Personally, I won't buy anything unless I see a pic of the ACTUAL item FS (not just an advertising pic from site) that way there's proof as to what the actual item I'm buying looks like. 
Now if you can get me the P/N of the lugs so I can check for compatibility we can make a deal on those (2) items (that is as long as they are still available).
BTW, nice pics of everything and the enlarge option - so many times there are no pics and they have to be requested (which if the seller would look at it from his POV - it just means they have to send 300 sets of pics- one set to every request
) Personally, I won't buy anything unless I see a pic of the ACTUAL item FS (not just an advertising pic from site) that way there's proof as to what the actual item I'm buying looks like. 
The lug nuts are McGard 64015. At Summit Racing they are part number MCG-64015.
http://store.summitracing.com/defaul...part=MCG-64015
Yes, I bought things without seeing pictures first and I got burned a few times myself. Words like "good condition" are subjective. I'll gladly take more pictures of anything if requested - like the clear front license plate cover. And if anybody is local then we can meet so they can see things for themselves in person. Not a problem and I understand completely about these things.
That's fine on the plate - if he doesn't decide to buy then put me next in line - I'll hold off on the lug nuts till I hear back - don't want to pay shipping 2X.
Checked the P/N you sent - they are the ones I would need...
Checked the P/N you sent - they are the ones I would need...
Last edited by 1QUIKWS6; Nov 6, 2005 at 12:39 PM.






