i'm going to try and list all these parts on here one last time before i throw them up onto ebay auction. all the prices listed are negotiable and i need to get rid of these parts fast, please pm me w/ questions and feel free to drop me an email at slozinpa@yahoo.com for pictures or any questions you may have.

LS1 stock parts- off of an 99 ls1 camaro m6

ac compressor- fully functional and in good condition. 75.00 obo

ac compressor bracket- good condition 25.00

p/s pump and lines- pump i believe is bad, but pulley, resivoir and lines all good. 45.00

ac lines from compressor - 35.00

stock ls1 intake- 65.00

stock ls1 tb (w/out sensors) 60.00

stock ls1 heads, very clean good condition, but believe they need new valve seats. all springs, valves, etc included. 200.00 obo

stock aluminum driveshaft - excellent shape, for an m6 150.00

egr and air tubes and egr valve- all parts functional, good condition. 45.00

stock ls1 injectors- good working order, all 8 included 150.00

stock ported ls1 maf - good working order, i'll include the rubber bellow w/ it - 75.00

ls1 front sway bar, w/ mounts- good shape - 50.00

ls1 kmember and lower a-arms- good shape - 80.00 for everything.

ls1 stock front springs/struts/strutmounts and upper a-arms- whole assembly for 125.00

ls1 cooling fans - working condition, very good shape- 75.00


LT1 parts for sale: all parts are from 95 lt1 camaro

altenator, good shape works well- 50.00

ps pump - w/ pulley and resiovoir works well- 50.00

ps lines from rack to pump- 40.00

ps rack - works excellent, new tie rod ends. 150.00

crank pulley - 35.00

polished lt1 fuel rails w/ stock regulator- 55.00

slp cold air intake- decent shape, works well- 125.00

granateli hi-flo maf sensor- 75.00

stock lt1 k-member- 50.00

lt1 front and rear bumper supports

lt1 oil pan

lt1 ac condensor

melling high performance oil pump

stock overflow / battery tray (lt1)

stock torque arm w/ poly bushing

stock lower control arms

TUBULAR PRO FAB LT1 K-MEMBER- new under 3k miles good shape- 250.00

ls1 front brake conversion-

3.42 ring and pinion for 10 bolt

many other parts that arent listed, pm me if interested in anything and remember prices are NEGOTIABLE, i need to clean out my garage. thanks,
Nick

 

how much you thinking for the Ls1 brake convertion, and what all are you including with it. i do not need the rotors.

 

have a top dash off of the lt1?

 

no top dash off an lt1 sorry

and as far as ls1 brake swap, i have rotors/pads, spindle, front hub wheel bearing caliper mount and caliper/lines. but sale is pending on the brake swap, feel free to make an offer tho.

 

i was wondering was granatelli MAF you have. i saw a reg one and then one for cold air mod. i was just wondering which one u have. can you please reply to me at rhapbeats@yahoo.com i might be interested in biuying the MAF.