If you are a vendor/builder and want to build me a Short Block...
Thread Starter
10 Second Club
iTrader: (2)
Joined: Dec 2004
Posts: 1,386
Likes: 1
From: Sumter, South Carolina
If you are a vendor/builder and want to build me a Short Block... If you want to build me a strong 150 shot worthy S/B 383 LS1 block and can do it before Christmas AND YOU ARE A VENDOR here with a great sparkling reputation PM me please and reply here too...we might do some serious business.
Last edited by Macon; Dec 8, 2005 at 07:03 AM.
Thread Starter
10 Second Club
iTrader: (2)
Joined: Dec 2004
Posts: 1,386
Likes: 1
From: Sumter, South Carolina
I made a tall order. I checked MTI, Thunder, TTP, LME and a few others. TTP and LME said they could do it. Thunder and MTI are busy. MTI was willing to push one through for me. TTP i'm sure would have done a great job based on my previous dealings with them, but I chose LME. Based on several great PMs in the form of feedback and Bryan's OUTSTANDING attitude and patience and my fervent belief that Texas and speed are synonymous...for whatever reason!! Anyway a new 11:1 Iron 408 with Eagle Forged Crank, Callies Rods and Wiseco Nitrous Pistons along with my AFR heads, Futral FM13, NX MAF nitrous @ 150 (or now), Racetronix Fuel Pump and 42 lb injectors...the list goes on coupled to my Strange 12 bolt and full Hotchkis/BMR/Bilstein suspension on the Fikse FM-10's should be pretty damn cool. Thanks Bryan for reporting the reciept of the 100 pounds of parts form me today...I am psyched. 
Thread Starter
10 Second Club
iTrader: (2)
Joined: Dec 2004
Posts: 1,386
Likes: 1
From: Sumter, South Carolina
Originally Posted by Macon
If you want to build me a strong 150 shot worthy S/B 383 LS1 block and can do it before Christmas AND YOU ARE A VENDOR here with a great sparkling reputation PM me please and reply here too...we might do some serious business.
- Macon