Does anyone here hae any low miles 241 or 317 casting heads for sale. Looking for something with low miles complete-thanks!

 

How much are you willing to pay? email me.

 

I have some stock heads off of a '02 LS1. Is that what you're looking for?

 

Hooper those "should" be 241's I believe.

 

Scratch the 241 heads guys-I need the LQ9's or the 317's. I wonder if someone can open my 243 castings to 69cc?

 

Patriot sells a set of ported 6L heads for only a grand US. Flow over 300 cfm @.600 and use good parts including a heavier duty valve. Those would be inexpensive and work well. (They are 72cc so you'd be approx 9.7:1 with a .045 headgasket)

 

Thanks for the info, Chris. I guess that's not what he's looking for.

 

I was thinking of reworking a set of 241's but I'm just going to get the 317's and mill them down to 69cc. I was going to open my 243's but I have decide to keep those for a future project.

 

Well, if you change your mind, I can let you have them at a very reasonable price.

 

I have a brand new never used set of 317 heads from GM..complete with valves, springs, retainers, spark plugs, and the water temp sensor. Fully assembled.... PM me what your looking to pay and we'll see if we can work out a deal.

 

Jim-I got the heads today-they look perfect! Thanks alot! I have already packed them up and shipped them back out to PSP performance to get decked and a little "going over". Thanks again for the great deal!

 

No Problem.... I'm glad to see that they are gonna get some good use. And I am also glad to hear you got them that quickly and that they arrived with no problems.

Thanks again, and enjoy!

Jim