Various parts
Various parts Corvette oil pan, windage tray and pickup in mint conidtion, no scuffs or damage $250 or offer
Stock composite intake manifold $50 or offer
Throttle by wire throttle body make offer
That's what I know I will not be using on my build up and don't need, all prices negotiable, just need it out. If you guys need anything not mentioned PM me about it and I'll see what i can do.
That's it for LS1 parts. Now for old school small block parts.
350 4-bolt main block, needs to be bored, was in a spray cabinet cleaned up beautifully, includes bucket containing main caps rods and pistons $75 or offer
Crank shaft for said engine, unknown stroke in good shape, could use some cleaning $60 or offer
1 pair cylinder heads off a 350 great for modding, needs work $30 or offer for the pair
Set of 8 Lunati hydraulic lifters $40 or offer
Edelbrock 650 cfm carb + rebuild kit for future use, carb was used on my 350 and worked beautifully. $100 or offer
Brodix Pro-Bracket aluminum Intake manifold with 750 cfm edelbrock carb, spacer, and 160 thermostat and housing (stock housing) $400 or offer
Intake manifold was used for only 600 miles before deciding on LS1 swap, like new condition, similar manifold prices for about $350 in summit Carb is in great shape and works perfectly, you get the thermostat and housing only because ya might as well have it if the carb comes with.
That does it for my parts, leave a pm and I'll be happy to get back to you.
Stock composite intake manifold $50 or offer
Throttle by wire throttle body make offer
That's what I know I will not be using on my build up and don't need, all prices negotiable, just need it out. If you guys need anything not mentioned PM me about it and I'll see what i can do.
That's it for LS1 parts. Now for old school small block parts.
350 4-bolt main block, needs to be bored, was in a spray cabinet cleaned up beautifully, includes bucket containing main caps rods and pistons $75 or offer
Crank shaft for said engine, unknown stroke in good shape, could use some cleaning $60 or offer
1 pair cylinder heads off a 350 great for modding, needs work $30 or offer for the pair
Set of 8 Lunati hydraulic lifters $40 or offer
Edelbrock 650 cfm carb + rebuild kit for future use, carb was used on my 350 and worked beautifully. $100 or offer
Brodix Pro-Bracket aluminum Intake manifold with 750 cfm edelbrock carb, spacer, and 160 thermostat and housing (stock housing) $400 or offer
Intake manifold was used for only 600 miles before deciding on LS1 swap, like new condition, similar manifold prices for about $350 in summit Carb is in great shape and works perfectly, you get the thermostat and housing only because ya might as well have it if the carb comes with.
That does it for my parts, leave a pm and I'll be happy to get back to you.