Cartek 2x cam, Ported TB, LS6 Intake
Cartek 2x cam, Ported TB, LS6 Intake Hey Guys Im selling a Cartek 2x cam 224 228 113 LSA .588 $300, 2000-2002 Ported TB $125, and a LS6 Intake $325. All parts have less than 5k on them except for the intake which has 48k. I also have a set of comp cams 7.350 pushrods $75 and a pair of 241 heads with comp 918's and ti-retainers $400. My car put down 385 RWHP with the cam only and longtubes through a 12 bolt and M6. The ported TB then added another 7RWHP, this is an awesome street and strip cam that makes power everywhere, just ask around. Please PM me with any questions. Thanks
Last edited by sickss228; Jan 7, 2006 at 02:55 PM.
Its not a direct fit but this is what you will have to do to make it work. The shaft that runs through the tb that the butterfly bolts to will need to be swapped out for your stock one. The part on the outside (cam) that has the spring on it... it's a different size (98-00...01-02). You need to take off the tps sensor, remove the little screws that hold the butterfly onto the shaft, remove the butterfly, then tap firmly but without galling the end.. the shaft that the tps sensor goes onto.the whole shaft will slide out towards the cam end and you can swap the whole shaft assembly from the stock one.
