lid, cam, springs, ret, intake, exhaust

 
Thread Tools
 
Search this Thread
 
Old Feb 14, 2006 | 08:58 PM
  #1  
01350ss's Avatar
Thread Starter
TECH Enthusiast
20 Year Member
iTrader: (18)
 
Joined: Feb 2004
Posts: 554
Likes: 0
From: central east coast florida
Default lid, cam, springs, ret, intake, exhaust

LS6 intakes off a 2001 SS. Sanded, primed, and painted gloss black then cleared. Looks real sharp under the hood. 41543 miles $400 SOLD

Comp 918 "blue stripe" springs 2 years old but only 3614 miles on them. Both winters the car sat (including this year) all rockers were removed to allow the springs to "relax" when not in use. $100 SOLD

Comp titanium retainers for above mentioned springs. Also 2 years old with same amount of mileage. $100 SOLD

Hotchkis 75mm lid. Painted Gloss black then cleared. Almost 3 years old. 9462 miles. $75 SOLD

Thunder racing 224/224/112 cam. 2 years old. 3614 miles. Excellent performer. Car ran a best of 12.2 at 120.11 mph with this cam on stock suspension, stock rear, drag radials, and a stage 3 clutch! Oil was changed every month regardless of miles (except the winters) $275

Pacesetter lt headers with air/egr fittings. Used for about 1 year. Some install/uninstall marks. 1849 miles. $250 SOLD

Tsp catted y-pipe. Used less than a year. (had true duals when I bought the headers- then switched a few months later) 1391 miles. 1 dent in front drivers pipe and surface scratches on drivers cat from a wicked run-in with a metal pipe that came off someones truck!! Happened about 1 week after install - cat is still fine. Ground clearence is fine. I have the full SS package so thats how my car sits. Tucks real tight against the floor. Recommend y-pipe hanger or poly motor mounts. I have the mounts and never had my y hit the floor board. $225

I live in Jersey, will drive to sell parts if needed. I also take paypal
All other parts still for sale

Last edited by 01350ss; Feb 19, 2006 at 07:20 PM.
Old Feb 14, 2006 | 09:36 PM
  #2  
ramsoccer11's Avatar
TECH Regular
iTrader: (5)
 
Joined: Jan 2005
Posts: 473
Likes: 1
From: corner of Techwood and 5th
Default

does the intake come w/ coolant lines?
Old Feb 14, 2006 | 09:57 PM
  #3  
Havok2's Avatar
11 Second Club
iTrader: (118)
 
Joined: Jan 2004
Posts: 2,994
Likes: 0
From: RGV texas
Default

pm me the lowest for the tit retainers, no springs.
Old Feb 15, 2006 | 12:10 AM
  #4  
01350ss's Avatar
Thread Starter
TECH Enthusiast
20 Year Member
iTrader: (18)
 
Joined: Feb 2004
Posts: 554
Likes: 0
From: central east coast florida
Default

ttt for the early morning
Old Feb 15, 2006 | 05:11 AM
  #5  
98A4LS1's Avatar
TECH Regular
iTrader: (1)
 
Joined: Nov 2004
Posts: 467
Likes: 0
From: Louisville, KY
Default

Do you have any pics of the intake manifold? What type of paint was used? Thanks.
Old Feb 15, 2006 | 07:00 AM
  #6  
wordy's Avatar
Teching In
 
Joined: Feb 2006
Posts: 0
Likes: 0
Default pm sent

Sent you a pm dude
Old Feb 15, 2006 | 05:39 PM
  #7  
tomz240's Avatar
On The Tree
iTrader: (5)
 
Joined: Jan 2006
Posts: 116
Likes: 0
From: Houston, TX
Default

PM me on the ls6 intake please.
Old Feb 18, 2006 | 07:23 PM
  #8  
01350ss's Avatar
Thread Starter
TECH Enthusiast
20 Year Member
iTrader: (18)
 
Joined: Feb 2004
Posts: 554
Likes: 0
From: central east coast florida
Default

ttt for the weekend
 




All times are GMT -5. The time now is 03:06 AM.