44lb. Injectors and Custom N2O Cam
Thread Starter
Joined: May 2004
Posts: 343
Likes: 0
From: West Suburbs of Chicago
Cam Motion Custom Cam- This is the same company that Futural Motorsports uses. This cam was grinded for a stock displacement LS1 engine with an LS6 head on it. The piston did have -2cc valve reliefs. Used for only 2 miles, not kidding only 2 miles. Decided to build a bigger motor
. Here are the specs: Duration @.050 240in./246ex. Lift @.050 639in./632ex. 114 LSA and 110 ICL
This cam will come with all the paper work.
This cam is very similar to the T-Rex cam except for a little more lift.
$315 shipped to the lower 48
44lb. Lucas Green Stripe Injectors. Used for 1k miles. SOLD
Check out my feeback, no worries these items are in EXCELLENT condition. Please PM me with any questions.
Thanks,
Tim
. Here are the specs: Duration @.050 240in./246ex. Lift @.050 639in./632ex. 114 LSA and 110 ICL This cam will come with all the paper work.
This cam is very similar to the T-Rex cam except for a little more lift.
$315 shipped to the lower 48

44lb. Lucas Green Stripe Injectors. Used for 1k miles. SOLD
Check out my feeback, no worries these items are in EXCELLENT condition. Please PM me with any questions.

Thanks,
Tim
Last edited by Timmy2Stage; Mar 2, 2006 at 12:35 AM.






