FS LS6 Valley Pan Cover
Thread Starter
On The Tree
iTrader: (16)
Joined: May 2005
Posts: 117
Likes: 0
From: Farmington Hills, MI
FS LS6 Valley Pan Cover I have 2 LS6 Valley Pan Cover's, one is brand new and the other has 1,000 miles on it. The new one is my dad's and the used one is mine. We are both deleting our PCV systems so we no longer need the LS6 Style Valley Pan. Both come with gaskets. $35 shipped each.
Thread Starter
On The Tree
iTrader: (16)
Joined: May 2005
Posts: 117
Likes: 0
From: Farmington Hills, MI
I had to cut the inside of the block to get mine in. My dad never installed his though.
Here is a picture of what you have to cut out to get this to fit:
http://ls1howto.com/howto/geniii/ls6.../final_cut.jpg
Here is the link on how to peform the install:
http://ls1howto.com/index.php?article=18
I actually didn't cut mine, I used a chisel instead, the block is actually really soft so it only took me a minute to get the block of metal out to get the valley cover to fit.
Here is a picture of what you have to cut out to get this to fit:
http://ls1howto.com/howto/geniii/ls6.../final_cut.jpg
Here is the link on how to peform the install:
http://ls1howto.com/index.php?article=18
I actually didn't cut mine, I used a chisel instead, the block is actually really soft so it only took me a minute to get the block of metal out to get the valley cover to fit.
