Cam Motion Custom Cam- This is the same company that Futural Motorsports uses. This cam was grinded for a stock displacement LS1 engine with an LS6 head on it. The piston did have -2cc valve reliefs. Used for only 2 miles, not kidding only 2 miles. Decided to build a bigger motor . Here are the specs: Duration @.050 240in./246ex. Lift @.050 639in./632ex. 114 LSA and 110 ICL
This cam will come with all the paper work.
This cam is very similar to the T-Rex cam except for a little more lift.

SOLD


Pm me if you have any questions.

Thanks,

Tim

 

Will this cam work on a 2001 z06? What all do I need to get this cam installed?

 

You would need a set of hardened pushrods, a good set of valve springs, and some custom tuning and you'll be ready to fly

Tim

 

back up.....

 

No one wants to go fast??

 

back up

 

Cammotion makes some really good cams that make some serious power.I had a cammotion in my car last season and went 9.45 with h/c on the bottle in a pretty heavy car.TTT for a hell of a cam

 

what kind of numbers did u put down?

 

How is it as a daily driver? I'm interested in the cam if it's ok.

 

I don't mean to be a d*** but could everyone please read the first paragraph where it clearly states only in the car for 2 miles!!
No dyno time, not driven more than 2 miles!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
IT'S PRACTICALLY A NEW CAM!!!


Tuff, CamMotion know what they are doing and had made some great cams. They grinded the cam that is in the LS2 in my sig. No dissappointments.

Thanks,

Tim