Pro Yank 4L60E and TTi street kit hot parts, etc...... FS
Thread Starter
TECH Enthusiast
iTrader: (3)
Joined: May 2002
Posts: 642
Likes: 0
From: Nashville, TN
Pro Yank 4L60E - I bought it used, but never ran a 1/4 or 1/8 mile pass on this tranny. It has held up fine on the street for me. I have ran this tranny on the dyno and I made 560RWHP/550RWTQ unlocked, on it no problem. (this is with my TTi street kit with T76GTQ turbo) Reason for selling is because I went with a TH400. - $500 shipped
TTi street kit hot parts - Includes log style manifold (1st version), crossover pipe(1st version), alternator relocation bracket, Turbonetics wastegate, '02 passenger side manifold, but does not come with intercooler or downpipe. Reason for selling is because I bought the TTi Race kit. I would recommend not running this kit over 10psi, this kit is good for 450/500RWHP with a T76. You will need a T4 flange turbo, intercooler and BOV to complete this kit. $300 shipped.
3.42 "thick" gears by Precision Gears. - These gears are for automatic cars that came with 2.73 gears from the factory (2 series carrier). Reason for selling these is because I'm going with 3.23 gears. I have not yet uninstalled these gears from my car yet. $100 shipped.
If you have any questions please send me a PM.
If you need pics I will try to have the shop take some, that is where the car is at currently.
Thanks!
TTi street kit hot parts - Includes log style manifold (1st version), crossover pipe(1st version), alternator relocation bracket, Turbonetics wastegate, '02 passenger side manifold, but does not come with intercooler or downpipe. Reason for selling is because I bought the TTi Race kit. I would recommend not running this kit over 10psi, this kit is good for 450/500RWHP with a T76. You will need a T4 flange turbo, intercooler and BOV to complete this kit. $300 shipped.
3.42 "thick" gears by Precision Gears. - These gears are for automatic cars that came with 2.73 gears from the factory (2 series carrier). Reason for selling these is because I'm going with 3.23 gears. I have not yet uninstalled these gears from my car yet. $100 shipped.
If you have any questions please send me a PM.
If you need pics I will try to have the shop take some, that is where the car is at currently.
Thanks!
Last edited by Mekkadon; Mar 20, 2006 at 12:09 PM.
Get me some pics on that 4L60E, and please hold it for me if possible. I am VERY interested. What all is done to it? Fully built? Does it come with a converter? Please let me know ASAP. Thank you.
Thread Starter
TECH Enthusiast
iTrader: (3)
Joined: May 2002
Posts: 642
Likes: 0
From: Nashville, TN
Originally Posted by 8banger
Get me some pics on that 4L60E, and please hold it for me if possible. I am VERY interested. What all is done to it? Fully built? Does it come with a converter? Please let me know ASAP. Thank you.
Thanks.
Thread Starter
TECH Enthusiast
iTrader: (3)
Joined: May 2002
Posts: 642
Likes: 0
From: Nashville, TN
8banger:
You currently have dibs on the tranny.
jessedale98:
You are next on the list if 1st deal falls through.
Photos will be sent to you tomorrow.
transam69230:
You currently have dibs on the TTi street kit hot parts.
Photos will be sent to you tomorrow.
Thanks for all that are interested.
You currently have dibs on the tranny.
jessedale98:
You are next on the list if 1st deal falls through.
Photos will be sent to you tomorrow.
transam69230:
You currently have dibs on the TTi street kit hot parts.
Photos will be sent to you tomorrow.
Thanks for all that are interested.
Trending Topics
Thread Starter
TECH Enthusiast
iTrader: (3)
Joined: May 2002
Posts: 642
Likes: 0
From: Nashville, TN
Originally Posted by transam69230
interested in the turbo kit. Get some pics up or send me a pm. Very interested!
I have pics of the hot side and cold side of the turbo kit. I also made a mistake in my post. It DOES COME WITH A 3IN downpipe. It also comes with the cold side piping (minus intercooler).
Here are the pics:
hotside
crossover pipe
log manifold
downpipe
cold side
my pricing still stands - $300 shipped.
Thread Starter
TECH Enthusiast
iTrader: (3)
Joined: May 2002
Posts: 642
Likes: 0
From: Nashville, TN
Originally Posted by thunderstruck
do you know approximately miles are on the transmission?
I would be lying if I said I did. But when I had it in the car it was doing just fine.
Thread Starter
TECH Enthusiast
iTrader: (3)
Joined: May 2002
Posts: 642
Likes: 0
From: Nashville, TN
Originally Posted by davered00ss
Do you have the install instructions for the turbo kit?


