1 Set of these very hard to get heads.
225cc's, complete. 2.08 intake valves, upgraded springs, rocker stands, ready to bolt on.
These heads are set up pn a 4" bore and have a 64cc chamber.
This is a perfect head for a NA 370/402/408/414 setup and can also work on a stock motor with a aggressive Cam.
11* rolled over valve design, Aftermarket casting that has been beefed up everywhere.
These heads are the ****.
Compression can change depending on the motor you have, the gaskets you use, and the pistons your running.
Anywhere from 10.5:1 on a stock motor all the way to 12.5:1 on a 408 can be achieved with the right gasket.
Retail on this set is 2725 plus shipping.
2500 bucks plus shipping and their yours. SHIPPING IS FREE IF PAID FOR BY WEDNESDAY MARCH 29th.
That is a hell of a deal for a top notch head that is very hard to get.

 

Here are some flow numbers.
.100" 71 57
.200" 153 114
.300" 208 163
.400" 265 204
.500" 308 222
.550" 320 228
.600" 328 231
.650" 332 234
.700" 320 236

 

Acturally shipping is free as long as you buy them by them before Wednesday of next week. I will edit that in the origional post.

 

Sent you a pm

Mark

 

I really wanted the 240s, why are you selling these?

 

I am going with a different set of ETP heads.
Going bigger. Thats all.

 

Sold...