i have a Comp XER 238/240 .605/.609 112lsa I would like to sell. the cam lists for $465 brand new on comps website. it has about 8,000 miles on it and there is no wear or pitting. i decided to buy another cam for my motor project so i dont need this one. this cam felt strong at the top, but also seemed to have some good power down low as well, much stronger off the line than my TSP 231/237. NO FLYCUTTING OR VALVE RELIEFS NECESSARY!! i ran it on stock CC heads with no issues.

SOLD!!!

 

do you have the camcard?

 

yes i have the original box with a cam card sticker on it. it shows the same specs as the cam card, its just on the box.

 

Ttttttt

 

How much power did this cam put down?? Do you have a dyno graph??

 

shortly after i put the cam in i discovered a blown head gasket and never got to dyno it.

 

Cam is still for sale. got you guys some numbers for it. a friend of mine installed this same cam in his 1999 Z28 m6, 120,000 miles with headers, STOCK LS1 INTAKE, ford 9 inch rear end with 4.10 gear, lid, and a cutout. his car put down 399 hp at around 6400 rpms and made 381lb.ft of torque. these numbers are very impressive to me since he still has an LS1 intake.

 

I have a few perf. parts that i can trade if you are interested.Thanks

 

pm sent

 

Interested in your cam
how was the idle. Do you have springs etc.
thanks

 

Sold!!!