Here's some pics of the new Strange Dana 60 that Scott@DriveLine Solutions is building for me. We are working on a few issues but should be all good soon. I personally watched him assemble and set up this rear. It took quite a few tries to get the pattern perfect, but thats the kind of quality you get when he works on it personally.

Take a look at this ****, and see my favorite pic comparing the Dana ring/posi to a 10 bolt 7.5" ring gear. And take a look at the size of that posi!! It might cost me some power but this tru-trac is a friggin tank!! We are thinking the 600 hp the tru-trac its rated for is a huge understatement!! Wohooo!!!

 

That looks sweet. Scott is the man. He just hooked me up with a couple grand worth of stuff for 9".....

 

ttt for those who haven't seen it

Will be going in soon

 

That is sweet.

Is the price simliar to what a 9inch/12 bolt costs?

 

I'm pretty sure it is cheaper than both of these. Way stronger than a 12 bolt (and whines less) and at least equal strength of a 9 inch, while taking less power to run and being a direct bolt in (no modification).

I think this is going to be THE rear end everyone puts in f-bodies from now on. I know if I had 2 grand laying around I wouldn't hesitate.

 

PM sent.

 

I would've ordered one if it wasn't gonna take so long for it to get here, I blew my 10-bolt on Sunday and needed a 9" right away, renting a car right now so I had to get one ordered fast. Ended up going with Bob @ Exotic Performance Plus, was going to go with Scott @ DLS but he got back to me too late, had already ordered from EPP cause I needed it so quickly didn't want to risk not having it in time. Now just found out it won't be here till Monday so I looks like i'll be renting the car another week till I can work on it the following weekend, very very unhappy about that. Anyway that thing looks like a freakin beast, if I break the 9" i'm sure this will be what replaces it.

 

Hey can you send me the same pm about the cost and stuff?

 

^ me 2 plz

 

Pm sent to both post #8 and #9.

 

me #3

 

You running enough HP to warrant a 60??

 

Could you PM the total cost also, definately interested.

 

Scott can you pm me a price i have abs and traction control. Can i still keep these options?

 

pm me a price as well

 

That's amazing how puny the 10 bolt ring gear is compared to the Dana's!

 

All PM's sent to all that have asked. I use OEM gears and they are dead quiet and they will hold up to any aftermarket gear out there. Unless a 3.90 or 4.30 is specified.

 

is it true that it dosent rob as much hp as a 12 bolt or 9"

 

Scott, could you shoot me a pm on pricing too? I'd be interested in the 3.90s gears, and it won't hurt my feelings not to retain ABS (I was going to do a full spool with a 12 bolt), and I do not have TCS. Thanks

 

Price PM like everyone else please Scott.