A 1998 Cadillac Deville pulled out in front of my and now my car is totalled. So I'm parting it out...

I've sold a lot of parts, but there' still a lot left. If there's something you need that isn't listed, just ask I might have it.

Here's what I've got:
3.42 TCS/ABS 10-bolt rear with TA Performance girdle (has reluctors at each wheel).

stock rear suspension parts.

Stock Formula hatch from my car. It’s white and has maybe a couple minor nicks in the finish. The glass is tinted as well. Needs connectors on the ends of the wires that go inside the car but that’s it.

Customized NOS nitrous kit. It was originally a dry kit for a V6 F-body, but I converted it to a wet kit and purchased jets for 50-175 HP. It includes: The bottle, brackets, remote bottle opener, mechanical nitrous pressure gauge, 20 feet braided line, 2 nitrous solenoids (one main feed and one purge), 1 fuel solenoid, 1 FPSS, a NOS fogger nozzle, jets (as mentioned above), all other hoses and connectors and wiring that I have. EVERYTHING I have minus the electric nitrous pressure gauge.

Electric fuel pressure gauge, Autometer Sport Comp 2-1/26", black face gauge. I had to cut/splice the harness to extend the wires under the hood, and have thus far not been able to get the sending unit end of the wire out from under there, it's trapped between the PCM and firewall. If I can get it out later, the buyer gets it too.

Corbeau CR1's with sliders and brackets (considering selling) - To those who have already asked, I will entertain offers below what I mentioned in the PMs. They are grey, a little lighter than the graphite interior of my car.

Stock cloth interior seats, front and rear, no tears that I know of in any seats (as memory serves)

Set of 2 rear floor mats.

I have a stock carpet from a 1999 Trans Am that only had 43k miles on it, I purchased it and was going to install it, but never got around to it.

UMI performance DS loop

Brand new LT1 oil pickup tube and screen

Brand new white high-pressure oil pump spring.

Felpro rubber re-usable oil pan gasket.

Full set of 4 floor mats. The driver's mat has some wear on it, and was trimmed at the corner where the gas pedal goes to keep it out from under the pedal.

The rear bumper cover is fine aside from what appears to be one crack in the paint above the license plate.

Driver's side clear front turn signal for a 93-97 Firebird/TA and possibly a Camaro.

Driver's door with window and tinted glass, power window motor replaced just over 1 year ago.

Brand new, in box power window motor.

I'm SURE there's more that could come off the car, like the driver's headlight assembly, the ABS module under the hood, the TCS module from the valve cover, the master cylinder/brake booster, and such. If there's something you'd like to know about and don't see it here, ask and I'll see if it's salvagable.

I do have some ballpark prices in mind for some of this, so if you're interested, PM and let me know. We'll discuss it.

I will entertain REASONABLE offers for parts, and will even consider driving up to 125 miles (Bowling Green, Nashville, Knoxville, etc...), we can meet somewhere and I'll bring the parts kind of thing..

 

PM sent

 

replied.

 

How about your Mirrors cash in hand need price shiped to 48439 and everything works right?

 

Which mirrors? The only mirrors left are the one on the windshield and the driver's outside mirror. I'd prefer to keep the mirror with the door for now. I'm hoping to sell the door complete.

 

Would you be willing to sell me the section of the interior wiring harness that goes to the driver side door controls? Particularly I need the plug from the harness that connects to the back power mirror controls found on the driver side door switch panel. Let me know. Thanks.

 

Do you have the passenger side headlight assembly? Or the center console top (thing which holds the shifter/ash tray on a m6) if so what color is it? Are you selling the intake eblow? Give me a price. I got dibs

 

Guys, I'm out of town this weekend, but will be home Sunday afternoon. So please don't hate me if it takes a little time to get back to you.

I will check on the wiring harness for the door for you ViolatorX

93formulabird, the passenger side of the car is destroyed, so that headlight assembly is toast. The intake elbow is the stock one and has two small tears in it so I'm assuming you wouldn't be interested in it. And the car was an Auto, and while I do have the upper console, someone else asked about the lower part so I will give him first dibs on the upper if he wants it. If he does not, then it will drop to you.

 

Ok, back home now. Got home late last night. so TTT.

 

can i see pics of the 16" by 8" rims ? I only need 2 and will you sell without tires? Where are you located?

 

Sorry, the stock rims are now sold. Someone came and got them last night.

Thanks for looking!

 

Driver mirror

 

I believe that I replied to your PM about that and mentioned that I'm wanting to keep that door as a complete unit for now.

 

Any luck with the wiring harness?

 

will you sell two of the 17x9.5 torq thrust?

 

do you have any headlight motors?

 

The passenger side headlight motor was destroyed in the collision, and the driver's side has been paid for and needs to ship out. Sorry.

Got home late last night so I haven't had a chance on the door harness, how much of it are you wanting again?

Sorry, the Torq Thrust II's are going to be sold together as a set, with tires.

 

How much for the TT11s?

 

I just need the retangular plug that connects to the back of the power mirror control switches on driver side door panel controls, and a small section of the wires that lead into the rest of the harness. Let me know if you're having trouble finding it, I'll try to find a picture of it online.

 

Ok, I understand what you're needing now. Do you know if there is a plug or something inside the car where i could just unplug and remove the entire door harness, or will I have to cut it?

if I cut it, where you want me to cut it at?