FS-NIB PowerBond (Same as SLP) 25% Underdrive Crankshaft Pulley for LS1,LS6,LS2 Vette
Thread Starter
Staging Lane
iTrader: (1)
Joined: Oct 2004
Posts: 59
Likes: 0
From: Palm Beach Gardens, FL
FS-NIB PowerBond (Same as SLP) 25% Underdrive Crankshaft Pulley for LS1,LS6,LS2 Vette I accidently deleted my thread yesterday so here it is again.
I just purchased a bunch of these underdrive pulleys/harmonic balancers at a great price and wanted to pass this on to fellow forum members. They are brand new in factory sealed boxes. SLP gets their pulleys from Precision Parts of Australia and relabels them as SLP. Precision Parts sells them under their own brand PowerBond and they are SFI certified. The least expensive I've seen them on the internet is at Texas Speed for $199.99 but most places sell the SLP labeled version for $229-$299. They are made of steel and the A/C pulley is not underdrive (a plus IMO) and uses the stock belt. I'm not sure which serpentine belt to use with the pulley as mine will not be installed until next week. Several owners of the ASP pulleys reported belt slippage, but the design of the PowerBond with raised sides prevents slippage or thrown belts.
The part # is PBU1117-SS25, and it is intended for 1997 to present LS1, LS2 and LS6 CORVETTES ONLY as seen on the Texas Speed site. They WILL NOT fit F bodies or LS7 motors. You can check them out on the Precision Parts website. You'll also need a GM LS1 Crankshaft (Harmonic Balancer) Bolt part # 12557840 which retails for $4.24.
Price is $140 shipped FEDEX ground. If you would like one, PM me your name and address. My paypal address is chillimd@adelphia.net. I will ship one when I receive your payment. Thanks.
Bill Heitman
"Dr Chill" on CorvetteForum too
On my car
I just purchased a bunch of these underdrive pulleys/harmonic balancers at a great price and wanted to pass this on to fellow forum members. They are brand new in factory sealed boxes. SLP gets their pulleys from Precision Parts of Australia and relabels them as SLP. Precision Parts sells them under their own brand PowerBond and they are SFI certified. The least expensive I've seen them on the internet is at Texas Speed for $199.99 but most places sell the SLP labeled version for $229-$299. They are made of steel and the A/C pulley is not underdrive (a plus IMO) and uses the stock belt. I'm not sure which serpentine belt to use with the pulley as mine will not be installed until next week. Several owners of the ASP pulleys reported belt slippage, but the design of the PowerBond with raised sides prevents slippage or thrown belts.
The part # is PBU1117-SS25, and it is intended for 1997 to present LS1, LS2 and LS6 CORVETTES ONLY as seen on the Texas Speed site. They WILL NOT fit F bodies or LS7 motors. You can check them out on the Precision Parts website. You'll also need a GM LS1 Crankshaft (Harmonic Balancer) Bolt part # 12557840 which retails for $4.24.
Price is $140 shipped FEDEX ground. If you would like one, PM me your name and address. My paypal address is chillimd@adelphia.net. I will ship one when I receive your payment. Thanks.
Bill Heitman
"Dr Chill" on CorvetteForum too
On my car
Last edited by Dr Chill; Apr 30, 2006 at 11:23 AM.
Thread Starter
Staging Lane
iTrader: (1)
Joined: Oct 2004
Posts: 59
Likes: 0
From: Palm Beach Gardens, FL
Originally Posted by Dr Chill
The part # is PBU1117-SS25, and it is intended for 1997 to present LS1, LS2 and LS6 CORVETTES ONLY as seen on the Texas Speed site. They WILL NOT fit F bodies or LS7 motors.
Trending Topics
Thread Starter
Staging Lane
iTrader: (1)
Joined: Oct 2004
Posts: 59
Likes: 0
From: Palm Beach Gardens, FL
If you want, you can ship it back to me and I will refund your money minus shipping and packing costs (about $12) as long as the box is unopened and still sealed. You could also sell it on this forum or one of the Vette sites because at the price you paid, it will sell pretty easily.
