C5 Corvette parts for sale - DOOR, TRANS, WHEELS, SEATS, and more!!

 
Thread Tools
 
Search this Thread
 
Old May 8, 2006 | 02:08 PM
  #1  
FastKat's Avatar
Thread Starter
TECH Addict
iTrader: (10)
 
Joined: May 2005
Posts: 2,487
Likes: 2
From: Pittsburgh, PA
Default C5 Corvette parts for sale - DOOR, TRANS, WHEELS, SEATS, and more!!

Here is what I have for sale off of a wrecked 1998 C5 Corvette coupe:

Driver's Door - COMPLETE with mirror, interior trim panel, glass, etc. $600 + shipping
Passenger Door - Shell is damaged, was squeezed between the firewall and rear quarter. Skin popped off and glass is broken. All internal components including speaker, control module, interior trim panel, etc are good. No mirror. $200 + shipping
4L60E Auto Trans - Not sure on mileage $500 + shipping
Front Left Suspension - Top and bottom A-arm, knuckle, ball joints, bushings rotor and caliper $300 + shipping
Seats - Will sell pair only. Beige leather, both power. I have now way to test them so they're sold as-is. Includes frame. They have some wear but no rips or tears. $300 + shipping
Chrome Rear Wheels - 1998 stock Chrome rear wheels - 5 wide spokes, 18" tall and I think 10" wide. I spun them on a balancer and they came out true. They are very nice wheels. Will include bald tires at no cost if desired. $200 + shipping
Chrome Front Wheel - same design as front except 17" tall, don't know width. $90 + shipping

The whole front clip is gone! I also have other misc interior and electrical parts.

I also have a good complete rolling rear clip with all suspension, brakes, rear end, glass, body, etc. Please contact me if interested.

Email me, PM me or call me at 412-401-6497. I can package and ship freight - we have a forklift so there will be no loading charge on our end. I'll pack it for free, but you must pay the postage or freight.

Thanks! -Dave
Attached Thumbnails C5 Corvette parts for sale - DOOR, TRANS, WHEELS, SEATS, and more!!-img_393small.jpg   C5 Corvette parts for sale - DOOR, TRANS, WHEELS, SEATS, and more!!-img_398small.jpg  

Last edited by FastKat; May 10, 2006 at 10:22 PM.
Old May 8, 2006 | 02:23 PM
  #2  
ufsnola's Avatar
Staging Lane
iTrader: (13)
 
Joined: Jun 2005
Posts: 74
Likes: 0
From: New Orleans
Default

pm sent
Old May 9, 2006 | 08:25 AM
  #3  
FastKat's Avatar
Thread Starter
TECH Addict
iTrader: (10)
 
Joined: May 2005
Posts: 2,487
Likes: 2
From: Pittsburgh, PA
Default

bump, someone out there must need vette parts!
Old May 9, 2006 | 09:23 AM
  #4  
BlackBirdWs6Zzz's Avatar
TECH Enthusiast
iTrader: (6)
 
Joined: Nov 2005
Posts: 744
Likes: 0
From: Michigan
Default

are these the Y2K wheels? Chrome.......or the thin spoke C5 wheels?
Old May 9, 2006 | 11:58 AM
  #5  
FastKat's Avatar
Thread Starter
TECH Addict
iTrader: (10)
 
Joined: May 2005
Posts: 2,487
Likes: 2
From: Pittsburgh, PA
Default

They're chrome, broad spoke wheels, not thin spokes. I'll leave the tires on if you want... otherwise I'll take them off. Here are some pics of the wheels and center caps.
Attached Thumbnails C5 Corvette parts for sale - DOOR, TRANS, WHEELS, SEATS, and more!!-img_4111.jpg   C5 Corvette parts for sale - DOOR, TRANS, WHEELS, SEATS, and more!!-img_4112.jpg   C5 Corvette parts for sale - DOOR, TRANS, WHEELS, SEATS, and more!!-img_4113.jpg  

Last edited by FastKat; May 9, 2006 at 12:12 PM.
Old May 9, 2006 | 05:27 PM
  #6  
muncie21's Avatar
TECH Enthusiast
iTrader: (14)
 
Joined: Apr 2005
Posts: 591
Likes: 0
From: NE Ohio
Default

Any interior parts? If so, what color and condition?
Old May 9, 2006 | 06:17 PM
  #7  
FastKat's Avatar
Thread Starter
TECH Addict
iTrader: (10)
 
Joined: May 2005
Posts: 2,487
Likes: 2
From: Pittsburgh, PA
Default

Whole interior is there and it's in pretty good condition. The interior color is beige... I think GM calls it "light oak" but I'm not sure. I have the carpets, floor mats, seats, etc.
Old May 9, 2006 | 07:05 PM
  #8  
muncie21's Avatar
TECH Enthusiast
iTrader: (14)
 
Joined: Apr 2005
Posts: 591
Likes: 0
From: NE Ohio
Default

I'd be interested in the following parts, provided they are black (not sure what is color matched and what is black only)
  • Driver's side knee bolster (goes under steering wheel)
  • Center console cover
  • Radio trim (goes around radio and AC controls)
PM me with price shipped to 87124
Old May 9, 2006 | 10:59 PM
  #9  
FastKat's Avatar
Thread Starter
TECH Addict
iTrader: (10)
 
Joined: May 2005
Posts: 2,487
Likes: 2
From: Pittsburgh, PA
Default

My interior is Light Oak... center console cover is beige leather and I believe the knee bolster is beige too. The radio bezel is broken. Sorry!

Originally Posted by muncie21
I'd be interested in the following parts, provided they are black (not sure what is color matched and what is black only)
  • Driver's side knee bolster (goes under steering wheel)
  • Center console cover
  • Radio trim (goes around radio and AC controls)
PM me with price shipped to 87124
Old May 10, 2006 | 11:38 AM
  #10  
89TTA's Avatar
Teching In
 
Joined: May 2006
Posts: 6
Likes: 0
Smile Corvette seats

Could I see pictures of the seats? I need tan leather seats for my newly acquired '89TTA. Are they bent or tweaked in any way, anything else wrong with them, and actually, pictures say a lot.
Thanks, Jim
Old May 10, 2006 | 02:43 PM
  #11  
FastKat's Avatar
Thread Starter
TECH Addict
iTrader: (10)
 
Joined: May 2005
Posts: 2,487
Likes: 2
From: Pittsburgh, PA
Default

The truth is the seats are in great shape, just a little dirty. I will sell them as is. There is some wear but no rips or tears. If you can clean them this can be your ticket. I have had HUGE HUGE success with Leaterique on seats that were VERY old and dirty... once you use that you'll never use anything else. Two nice vette power seats that need a quick cleaning for $300 isn't a bad deal. They don't look bent, but I won't know for sure until I take them out. Let me know if you're still interested.

Originally Posted by 89TTA
Could I see pictures of the seats? I need tan leather seats for my newly acquired '89TTA. Are they bent or tweaked in any way, anything else wrong with them, and actually, pictures say a lot.
Thanks, Jim
Old May 11, 2006 | 11:31 PM
  #12  
FastKat's Avatar
Thread Starter
TECH Addict
iTrader: (10)
 
Joined: May 2005
Posts: 2,487
Likes: 2
From: Pittsburgh, PA
Default

bump!
Old May 15, 2006 | 01:44 PM
  #13  
FastKat's Avatar
Thread Starter
TECH Addict
iTrader: (10)
 
Joined: May 2005
Posts: 2,487
Likes: 2
From: Pittsburgh, PA
Default

Parts still for sale - make me an offer!
Old May 15, 2006 | 02:36 PM
  #14  
RPO_Z06's Avatar
Launching!
iTrader: (11)
 
Joined: Aug 2005
Posts: 209
Likes: 0
From: Norman, Oklahoma
Default

Send me pics of the seats. RPOZ06(at)gmail.com
Old May 16, 2006 | 12:03 PM
  #15  
FastKat's Avatar
Thread Starter
TECH Addict
iTrader: (10)
 
Joined: May 2005
Posts: 2,487
Likes: 2
From: Pittsburgh, PA
Default

Pics sent! Lots of good stuff here!!
Old May 16, 2006 | 12:58 PM
  #16  
MagiC5's Avatar
Launching!
 
Joined: Mar 2006
Posts: 261
Likes: 1
From: Nebraska
Default

Do you have a Glass targa top for this? if so pics and price shipped to davidnewman3@hotmail.com (zip 68505) were there any performance parts not used in your swap... IE. intake, O/R x pipe, Do you know what suspension code this is? and very unlikely but does this car have HUD? Heads UP DISPLAY.. you would see a clear box on the driver side dash... sits behind the cluster...
Old May 16, 2006 | 04:09 PM
  #17  
FastKat's Avatar
Thread Starter
TECH Addict
iTrader: (10)
 
Joined: May 2005
Posts: 2,487
Likes: 2
From: Pittsburgh, PA
Default

Sorry, the targa is painted, not plastic and it's not a HUD car either. I'm not sure of the suspension package but can check... how can I tell? Also, the car came with chrome wheels... 17" in the front and 18" in the back. Only performance part was a Borla cat back, and I sold it already.

Thanks, -Dave
Old May 16, 2006 | 04:49 PM
  #18  
GTFORMULA's Avatar
TECH Resident
iTrader: (94)
 
Joined: May 2003
Posts: 990
Likes: 0
From: port st lucie florida
Default

I need the passenger rear spindle. Do you have one and how much? I just need the spindle nothing attached to it. Do you have the rear diff case? Do you have all of the auto trans parts ? Torque tube,shifter, and stuff? Let me know
Old May 16, 2006 | 05:20 PM
  #19  
FastKat's Avatar
Thread Starter
TECH Addict
iTrader: (10)
 
Joined: May 2005
Posts: 2,487
Likes: 2
From: Pittsburgh, PA
Default

I have the entire rear differential and suspension, wheel to wheel. I also have ALL of the automatic trans parts including shifter and linkage, however I will have to check on the torque tube. I don't want to sell the spindle alone though. Call me at 412-401-6497 for more details!!

Originally Posted by GTFORMULA
I need the passenger rear spindle. Do you have one and how much? I just need the spindle nothing attached to it. Do you have the rear diff case? Do you have all of the auto trans parts ? Torque tube,shifter, and stuff? Let me know
Old May 17, 2006 | 02:20 PM
  #20  
FastKat's Avatar
Thread Starter
TECH Addict
iTrader: (10)
 
Joined: May 2005
Posts: 2,487
Likes: 2
From: Pittsburgh, PA
Default

Seats pending... (didn't realize they were SELLING for $865 on eBay) LOTS OF GOOD PARTS LEFT!



All times are GMT -5. The time now is 07:39 PM.