F/S LT1 stuff, long tubes, TNT F1, digital window switch, ect.
F/S LT1 stuff, long tubes, TNT F1, digital window switch, ect. Here is just some of the some i am selling off the car now, there will be a lot more like suspension stuff but i still need the car to roll around.
Hooker Long Tube Headers, (ceramic coated)
Mufflex Y-Pipe
A Fabbed Dual System Off The Y-Pipe
The headers are scraped at the bottom and the coating is a little discolored in a few places but in perfect working condition. The exhaust has perfect ground clearence because it does not sit up in the car like a normal true dual system. Sound great and also picked up 20 RWHP on the dyno over a 4" mufflex. Uses 2 dynomax bullits and is now painted flat black, not shown in the picture.
$500.00
42.5 injectors $200.00
Complete TNT F1 nitrous system with 2 nozzels
MSD digital window switch
NOS bottle heater
huge bag of jet
TNT purge
2 15 pound TNT bottles
misc hardware and a custom bracket for an LT1
The nitrous system is set-up for an LT1, custom solenoid bracket and purge line with a -6AN feed on the fuel solenoid
$750.00
Aeromotive LT1 fuel pressure regulator $75.00
Custom 3 1/2" induction
Powder coated gloss black, filter included, slightly deformed but straight and in good condition, uses an SLP throttle body elbow, (not included)
$75.00
Hooker Long Tube Headers, (ceramic coated)
Mufflex Y-Pipe
A Fabbed Dual System Off The Y-Pipe
The headers are scraped at the bottom and the coating is a little discolored in a few places but in perfect working condition. The exhaust has perfect ground clearence because it does not sit up in the car like a normal true dual system. Sound great and also picked up 20 RWHP on the dyno over a 4" mufflex. Uses 2 dynomax bullits and is now painted flat black, not shown in the picture.
$500.00
42.5 injectors $200.00
Complete TNT F1 nitrous system with 2 nozzels
MSD digital window switch
NOS bottle heater
huge bag of jet
TNT purge
2 15 pound TNT bottles
misc hardware and a custom bracket for an LT1
The nitrous system is set-up for an LT1, custom solenoid bracket and purge line with a -6AN feed on the fuel solenoid
$750.00
Aeromotive LT1 fuel pressure regulator $75.00
Custom 3 1/2" induction
Powder coated gloss black, filter included, slightly deformed but straight and in good condition, uses an SLP throttle body elbow, (not included)
$75.00
Last edited by lafnlt1; May 21, 2006 at 10:57 PM.
hey, would you be willing to sell the y pipe by itself.. if so let me know, email me at harvickgm@yahoo.com
sorry to disappoint, but i think i just decided to sell the whole car. i was planing to do an 88mm turbo set-up but changed my mind, i'm going a different route. if things don't work out, i will let you all know.
