Cleaning house. I decided to go a different way with my Silverado and have some stuff for sale. Everything shipping from Chicago 60655.


LQ9 317 Heads. Real good condition with rockers and springs assembled. $300 plus shipping. SOLD

10" MTX subs T8104
# Size: 10"
# Impedance: 4 Ohms
# Freq Response: 28 Hz- 150Hz
# Peak Power: 400 Watts
# Recomended Power: 400-800 Watts
# Sensitivity: 84.3 dB
# Voice Coil: 2.5"
# Magnet Weight: 102 oz.
# Mounting Depth: 5"
They are $130 new each. I have a pair still in the boxes. Nice heavy, vented magnets with spring terminals and a heavy surround. I would like to get $130 for the pair plus shipping.

2 10" truck sub boxes. Will not work with the subs listed above(The subs are too big, bought these for my boat and never used them). $30 plus shipping.

I have some more parts also that I will be posting up soon. Decided I am going to keep my current cam in my Z and keep my truck close to stock. I will also be doing a head swap on my Z soon so I will also have stock 241 heads with 918's installed going up for sale.

 

I want the springs and retainers if the milage is low I will send you a PM

 

Edited specs on XR265 cam. DOuble checked the lobe numbers, so these are correct. I was going off of memory the first time.

 

do you have pics of the heads?? are they aluminum? please send pics to ashalton1598@charter.net

 

They are aluminum. I will get some pics later and email them to you.

 

Springs and retainers are SOLD pending payment.

 

Pics of the heads to jones71@earthlink.net How many miles are on them?

 

Here are some pics of the heads. I didnt clean them at all except for the one exhaust port I took a picture of. As you can see in the pics they are used, but are in really good condition. The package will weigh about 65 lbs, but they will be packaged very well.

 

Bump!

 

how much for the converter shipped to 78577?

 

Shipping is soming up as $38 on ups. I would do it for $320 shipped. If you want it let me know. I will putting some of this stuff on eBay next week.

 

pm sent

 

PM replied

 

Comp XR269HR Cam. Also used but in very good shape.
216/220 .525/.532 114+4


take $150 for this cam?

 

I cant go that low. For that price I will just hang on to it. I will do $200 shipped. This is a great cam for somebody just looking for more power but with a mild motor.

 

For those wanting pics of the cams, I will post them in here tommorow. Any other pic requests let me know. I would have taken pictures of it all but I have been pretty busy.
Thanks.

 

The first 4 pictures are of the Comp cam, the least 4 are of the MTi. I hope this helps. When you run your finger across the lobe it is completely smooth on both cams. You can see where they were both run, but the lobes have almost no physical wear on them.

 

I want the MTI Cam. You can email me at ciws20mm@hotmail.com.

 

I sent you a PM. There is a guy ahead of you right now, I will let you know.

 

Both cams are Sold!!
Thanks guys.