aeromotive fuel pressure regulator
Thread Starter
On The Tree
iTrader: (26)
Joined: Oct 2005
Posts: 116
Likes: 0
From: Windsor, Ontario, Canada
Compact EFI Regulator, P/N 13105
This regulator is used but works perfect. It has never leaked or given me any troubles at all. The only thing I have done to it was to change the inlet and outlet ports to -8 fittings instead of the supplied -6 fittings. Vacuum referenced 1:1, and it has a 1/8th port on the opposite side of the inlet for a guage if you so desire.
$100 shipped.
Thanks,
Jim
This regulator is used but works perfect. It has never leaked or given me any troubles at all. The only thing I have done to it was to change the inlet and outlet ports to -8 fittings instead of the supplied -6 fittings. Vacuum referenced 1:1, and it has a 1/8th port on the opposite side of the inlet for a guage if you so desire.
$100 shipped.
Thanks,
Jim
Last edited by 1BadDime; Jun 4, 2006 at 09:48 PM.


