Parts for Sale - A/C, 9 Inch Center Sction, Shocks, Etc.
Parts for Sale - A/C, 9 Inch Center Sction, Shocks, Etc. I have the following items for sale from my 2000 TA ready for immediate shipping from 98031 (Kent, WA). I have pictures of most things (or can get them quick--The 9 inch is already packaged.) Provide e-mail address if requesting photos. Shipping not included in prices. I accept PayPal.
-Bilstein HD rear shocks (maybe 25K miles on them) - $60
-A/C compressor (other hardware too) - $100 (SOLD)
This is a Seattle, WA car--meaning this stuff maybe saw 10 weeks of use.
-TA Black Leather Steering Wheel with stereo controls and air bag - $100
-Coil spring air bag (traction, brand new)(pic shows two, one for sale) - $30
(SOLD)
-Ford 9 inch center section (Strange nodular case already notched for torque
arm clearance, Daytona aluminum pinion support, 31 spline, 4.11 gears,
Detroit Locker, 1350 forged yoke, solid spacer. I ran this in my car for about
500 miles (no track use). Works great but too noisy for street use (my
opinion). The gears are brand new and professionally installed. There was a
shortage of gears last summer and I grabbed the set out of this one for my
other rear. These gears have never been run. I can't guarantee the noise
level (just like the guy that sets them up won't). $800 (cost $1200 new)
-Fuel pressure safety switch attached to line fitting. Nearly new. - $20 (SOLD)
-Front tunnel brace from Spohn torque arm (header version) with integral drive shaft safety loop. ($50) (SOLD)
-Stock CD changer ($100)
-Stock M6 front torque arm mount ($25) (PENDING)
-G2 lid, modified to work with TNT power ring ($40) (PENDING)
-1 3x3x24 Dynomax bullet muffler - new - ($20) (PENDING)
-Bilstein HD rear shocks (maybe 25K miles on them) - $60
-A/C compressor (other hardware too) - $100 (SOLD)
This is a Seattle, WA car--meaning this stuff maybe saw 10 weeks of use.
-TA Black Leather Steering Wheel with stereo controls and air bag - $100
-Coil spring air bag (traction, brand new)(pic shows two, one for sale) - $30
(SOLD)
-Ford 9 inch center section (Strange nodular case already notched for torque
arm clearance, Daytona aluminum pinion support, 31 spline, 4.11 gears,
Detroit Locker, 1350 forged yoke, solid spacer. I ran this in my car for about
500 miles (no track use). Works great but too noisy for street use (my
opinion). The gears are brand new and professionally installed. There was a
shortage of gears last summer and I grabbed the set out of this one for my
other rear. These gears have never been run. I can't guarantee the noise
level (just like the guy that sets them up won't). $800 (cost $1200 new)
-Fuel pressure safety switch attached to line fitting. Nearly new. - $20 (SOLD)
-Front tunnel brace from Spohn torque arm (header version) with integral drive shaft safety loop. ($50) (SOLD)
-Stock CD changer ($100)
-Stock M6 front torque arm mount ($25) (PENDING)
-G2 lid, modified to work with TNT power ring ($40) (PENDING)
-1 3x3x24 Dynomax bullet muffler - new - ($20) (PENDING)
Last edited by CW00BlackTA; Jun 10, 2006 at 03:50 PM. Reason: Marking sold items.
send pics of tunnel brace to cmblack13@yahoo.com! Are the bilstein still in good condition? let me know in my email!
Trending Topics
Originally Posted by cmblack13
send pics of tunnel brace to cmblack13@yahoo.com! Are the bilstein still in good condition? let me know in my email!
