All prices are for parts only, shipping is extra. Paypal is OK, I do not charge for the fee. Prices are firm. Thank you

Corvette LS6 balancer. This is a takeoff from Katech. Includes new bolt. $75

Truck 5.3 balancer - used $15

knock sensor harness from 5.3 $10

LS6 Corvette motor mounts, excellent condition. Includes brand new rubber doughnuts from the dealer. $100

5.3 front cover, valley cover, rear cover $25 each

5.3 used water pump $35

Bosch "red" 30# injectors. New, never used. Full set of 8. $125 SOLD

24X reluctor wheels for crank. New. I have 3. $15 each

5.3 truck intake manifold. Includes fuel rails and throttle body. $50
no sensors

Victor Jr. intake manifold with fuel rails. New, never installed. $325

Lucas "blue" injectors. Flow 48#, with flow sheet. New. $125 SOLD

3 feet of fuel rail from Accel. Clear colored. New $25

3 feet of fuel rail from FAST. Black anodized New $25

8 injector bungs from FAST. New $75

Accel GenVII main engine harness for Chev. New $225

Walbro 255 in line fuel pumps. New. I have 2 for sale. $100 each

LS6/Corvette oil pan. Only 1000 miles on motor. Includes new dipstick and tube which were never installed. $195

Hedman headers are junk - I am returning, will not sell. Sorry

I will get back to people ASAP. Leave me a phone number if you can. I work nights, but will do my best. I can send photos if necessary. Thanks, Mac

 

Do you know if these will fit an LT1? Can you also please send me pics?

 

Does the vic intake have pre drilled injector bungs? Do you know the edelb part #?

 

yes do you have pics of the headers if so email to abh114@aol.com

 

Interested in 48# injectors, pictures please. What kind of payment do you accept? aaronanderson@mac.com

 

also interested in injectors

 

This intake does have the bungs for the injectors. It also comes with the fuel rails and mounting hardware. The part number is 29085. I still have the box, the manifold has not been installed, just set on the block for measurements.
Mac

 

TTT for the 48# injectors. Have cash.

 

calling about the 30's today.

 

Sent PM

 

I am awaiting payment on both sets of injectors. If the deals do not work, I will repost. Thank you for your patience with me. Mac

 

payment sent

 

Is the Gen VII for the LS1 based motor or a SBC ? I maybe interested.

Thanks,
Dave

 

The Accel harness will work with either application. The way they are built, the particular application plugs into the"ignition" connector. It will then support a conventional Gen I ignition or allow the plug in of the LS1 module which drives the 8 coils. I do have the LS1 module available also. (forgot I had one) . This is really intended to be a stand alone system If you are interested in the GenVII or Big Stuff, or Fast and keeping your factory harness and options working, contact Brian at Horsepower Connection. He is the man to see. Thanks, Mac

 

up for the weekend, thanks Mac

 

finally someone not worried about the 3% for paypal!!!!!!!!

 

PM sent

 

pics of the truck intake please sales@ledgauges.com

 

bump for a great guy to deal with.

 

Got my mounts today! Thanks.