Pictures of for sale items: (On pages 3-5 of the webshots)

http://community.webshots.com/album/547529243mwmQOg/3

Brand New In Box Comp Pro Magnum Rockers 7/16 Stud Non Self Aligning 1.6 Ratio Part# 1305-16 - 280 to your door from summit - 250$ plus shipping

Vented Optispark hardly any miles on it - 110$ plus shipping.

Vented Optispark Harness - 25$

Brand New ARP 12 Point Stainless Header Bolts - 29$

Brand New Carbon Composite Header Collector Gaskets - 7$

Used Header Gaskets - 5$

Manley Titanium Retainers - part # 23632-16 - for beehive springs - 110$ Plus shipping.

Like New Comp Cams Titanium Retainers for 26918 Springs Regulary 190 shipped - 125$ plus shipping

Brand New Elite Spark Plug Wires - Cut to length, heat shielded - 80$ plus shipping

All prices are firm, don't play price games with me, all prices listed are a great deal as is.
______________________
Brand New In Box Comp 26918-16 Beehive Valve Springs - 190 to your door from summit - 155$ Plus shipping - SOLD

Brand New In Box Comp Steel Retainers for Beehive Springs Part# 795-16 - 50$ plus shipping - SOLD

Brand New In Box Comp Seats for Beehive Springs Part #4705-16 - 40$ plus shipping - SOLD

Brand New In Box 10* Locks - 20$ plus shipping. - SOLD

CSI Electric Water Pump - 115$ plus shipping - SOLD

Cloyes True Roller Timing Chain - top of the line set - 65$ plus shipping - SOLD

LT4 Intake Manifold - 600$ OBO SOLD

LT1 Poly Motor Mounts Mounted in Clamshell - 50$ plus shipping - SOLD

Mufflex Y-Pipe for LT1 Longtubes - 275$ plus shipping new---140$ plus shipping. - SOLD

Brand New Spark Plug Wire Valve Cover Mounting - 44$ SOLD

Brand New EGR Block Off Plate - 12$ SOLD

Brand New EGR Block Off Plate Gasket - 2$ SOLD

Brand New In Box ARP 3/8 Studs - 30$ plus shipping. SOLD

Bilstien Heavy Duty Shocks - These are 380$ new. 200$ for all four. 5K Miles of use. SOLD

Brand New In Box Comp Cams 7/16 Studs - 30$ plus shipping. SOLD

B&M Supercooler - SOLD

MSD Blaster Coil - not many miles - 30$ plus shipping. - SOLD

Brand New Felpro Header Gaskets Steel Core - 16$

Brand New In Box Comp Cams 78080-16 Hardened Pushrods Stock Lenght - 30$ - SOLD

Lakewood Adjustable Panhard Rod Black Powdercoated - 65$ Plus Shipping - SOLD

Comp XE 503 224/230 Cam - Around 1K miles of use - 170$ plus shipping SOLD

ATI 3200 LT1 Torque Converter - 3K miles of use - Over 700$ new - 400 plus shipping - SOLD

160 Thermostat used with not many miles of use 10$ - SOLD

Lakewood Boxed Rear Lower Control Arms (Non Adjustable) Black Powdercoated - 65$ Plus shipping - SOLD

Comp Cams 26918-16 Springs - Used around 2K miles - New for 190 Shipped -105 plus shipping. - SOLD

95 Timing Cover - SOLD

UMI Tubular Rear Lower Control Arms Powdercoated Red - 65$ Plus shipping - SOLD

Brand New 12 in. O2 Sensor Extenders - 22$ - SOLD

Brand New Magnaflow High Flow 3in Catalytic Converter - 70$ plus shipping. - SOLD

Autometer Dual Gauge Pod - 27$ Plus Shipping SOLD

 

Mufflex Y-Pipe for LT1 Longtubes - 275$ plus shipping new---140$ plus shipping.

Brand New In Box Comp 26918-16 Beehive Valve Springs - 190 to your door from summit - 155$ Plus shipping

Brand New In Box Comp Steel Retainers for Beehive Springs Part# 795-16 - 50$ plus shipping

Brand New In Box Comp Seats for Beehive Springs Part #4705-16 - 40$ plus shipping

Brand New In Box 10* Locks - 20$ plus shipping.

can i get pics of all of this sent to harvickgm@yahoo.com
very interested.. especially in the Mufflex ypipe. thanks

 

This is not a direct response to you but: I will take pics of the water pump, Y Pipe or any other part that is not new in the box. I feel that taking pics of new in the box items is a waste of my time, if you want to see what they look like they are on just about every aftermarket parts website out there. If you don't trust me then you should read my feedback on here and just about every other F Body forum out there.

 

Harvick I will be bussy during the day and in a crime lab all night tommorow, and then is the next day is the Fourth. Thanks for your interest and I will get pics of that y pipe to you as soon as possible. Shipping should work out nicely since all that should be able to fit in one large box.

 

My friend with an LT1 may be interested in the y-pipe, water pump, cam, and springs/seats/retainers/locks. You said the price is firm, so it would be roughly $650 by my estimation...how much with shipping?

 

yea, i was mainly looking for pics of the Ypipe i just put all that up as a hold for all the other parts... so i call dibs on what i posted..
let me know
PM sent

 

is the Ypipe a 3" collector or 4" going to Ipipe?

 

3 and a half inch to a 3 inch reducer I belive. Would highly prefer local pickup on this item.

 

got a price on the intake yet?

 

LT4 intake is 600$

 

how much for the Cam shipped to 92054

 

Do you still have that MSD blaster coil? If it would fit a B-body LT1 consider it sold. Email me at audi1031@gmail.com or you can send me your paypal to that address

 

I am not sure if it would work or not. I will check around.

 

Do you still have the bilstiens? If so could I see a pic, didn't see one in the webshots.

How much shipped to 46310?

Also for quickest response hit me at auxout at mchsi dot com if you like.

 

There is a pending sale on the bilstiens. If it falls through I will contact you.

 

how much for the comp cam push rods shipped to 78596

Thanks
Ove

 

37$ with tracking.

 

were these push rods for that cam you are selling..............
and will they be gooding enough for the CC306

Thanks
OVe

 

Ove,

I had them for the XE 503 project I was going to do but that never got started. I got into the LS6 world instead. Those pushrods should be fine with the CC306 also.

 

well if they do good with the CC306 and they are stock length then consider them sold.
also how much do this pushrods go for from a performance shop around 38-40 dollars right
Thanks
Ove