All items are in Raymore, MO.
Will ship or meet you anywhere in/near KC.
Cash, Check, Paypal, Trades...

Prices do not include shipping

LT1 water pump gaskets $1 each (NEW) [2 sold, 1 left]
(I have no idea how I ended up with so many extras)
http://i38.photobucket.com/albums/e1...n/PICT4902.jpg

58mm -> 52mm LT1 throttle body spacer/adapter. $30 (Used ~10k miles)[SOLD]
With gaskets and bolts. (allows you to use a 58mm TB on stock Lt1 TB bores)
No longer need this, I had my manifold ported.
http://i38.photobucket.com/albums/e1...n/PICT4903.jpg

Cold air intake from my 2003 Trailblazer LS $20 (Used ~3k Miles, sold vehicle)
http://i38.photobucket.com/albums/e1...n/PICT4904.jpg
http://i38.photobucket.com/albums/e1...n/PICT4905.jpg

Stock lifters from 93 Firehawk $10 (Used, ~35k miles)[SOLD]
In good working condition, removed when I upgraded heads/cam
http://i38.photobucket.com/albums/e1...n/PICT4907.jpg

Stock cam from 93 Firehawk $15 (Used, ~35k miles)
202/207 116LSA 0.300/0.307 lift 0.450/0.460 (1.5:1)
Nice upgrade for third gens.
In good working condition, removed when I upgraded heads/cam
http://i38.photobucket.com/albums/e1...n/PICT4910.jpg
http://i38.photobucket.com/albums/e1...n/PICT4909.jpg

Stock intake manifold from 93 Firehawk $70 (Used, ~35k miles)
Bolt on or send it away for porting
In good working condition, removed when I upgraded heads/cam
http://i38.photobucket.com/albums/e1...n/PICT4912.jpg
http://i38.photobucket.com/albums/e1...n/PICT4913.jpg
http://i38.photobucket.com/albums/e1...n/PICT4915.jpg

Stock 22lbs injectors from 93 Firehawk $10 (Used, ~35k miles)[SOLD]
In good working condition, removed when I upgraded heads/cam
http://i38.photobucket.com/albums/e1...n/PICT4917.jpg

Stock torque converter from 93 Firehawk $25 (Used, ~35k miles)
Should fit any 4L60, 4L60E or 700R4 LT1 setup.
In good working condition, removed when I upgraded to a 3200 stall
http://i38.photobucket.com/albums/e1...n/PICT4918.jpg

Stock cylinder heads from 93 Firehawk $150 (Used, ~35k miles)[SOLD]
643 castings (54cc, aluminum and lots of material for porting)
Info about LT1 castings.
http://web.camaross.com/forums/showthread.php?t=427346
At least two of the passenger side header bolt holes are crossthreaded
and will need to be chased or rethreaded. I have not priced that yet,
but I would not expect it to be expensive at all.
http://i38.photobucket.com/albums/e1...n/PICT4919.jpg
http://i38.photobucket.com/albums/e1...n/PICT4921.jpg
http://i38.photobucket.com/albums/e1...n/PICT4922.jpg

Stock cylinder heads from 93 Trans Am $125 (Used, ~130k miles)[SOLD]
643 castings (54cc, aluminum and lots of material for porting)
Info about LT1 castings.
http://web.camaross.com/forums/showthread.php?t=427346
Came off Lonnie's T/A when he upgraded to ported heads/cam.
Broken bolt in one of the outer exhaust manifold bolt holes (does not affect headers)
I have tools to remove it, I just haven't had time to do it yet.
Minor mark in one of the cylinder bowls, not effect matinr surfaces (see pics)
http://i38.photobucket.com/albums/e1...n/PICT4924.jpg
http://i38.photobucket.com/albums/e1...n/PICT4925.jpg
http://i38.photobucket.com/albums/e1...n/PICT4926.jpg (mark circled in yellow)
http://i38.photobucket.com/albums/e1...n/PICT4927.jpg
http://i38.photobucket.com/albums/e1...n/PICT4928.jpg (broken bolt circled in yellow)

 

pm'd ya on local board under big-t

 

Enjoy the heads

 

Oh I will and thankyou again. If anyone is leary of doing business with him don't be he is awesome waited for a long time for me to come meet with him and then came back after he had already left.

 

Items listed on Ebay now

http://cgi.ebay.com/ebaymotors/Intak...QQcmdZViewItem

http://cgi.ebay.com/ebaymotors/Torqu...QQcmdZViewItem