All these parts are pretty much BRAND NEW with 30 or less passes on them and no street miles. The car only has 345 original miles. prices dont include shipping. I got all new prices right off thunders site. If you buy a lot of stuff, I'll cut you a deal. Im located in Virginia Beach, VA and take paypal.

*coleman racing 3.5" aluminum driveshaft with heavy duty yoke and u-joints. 19 passes. length for 9" ford. $325

---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ----


*****Im also parting out a stock 98 Z28**** heres the link:

https://ls1tech.com/forums/showthrea...64#post5651664

---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ----

stuff thats sold.....

*9" billingsley fab. sheetmetal rear and custom Moser 40 spline axles
****SOLD ****

*Bogart fluted drag stars 15x3.5 fronts and 15x9.75 rears with 4 caps. New 165r front tires and new m/t et street 26x11.50 rear tires.tires only have a few passes ***** SOLD *****

*BMR silver upper control arms. ****SOLD ****

*slp fan switch *** SOLD ****

*fast toys ram air ***SOLD ****

*ASP crank pulley *****SOLD****

* 3 Guage pillar with autometer carbon fiber series trans temp, water temp, and oil pressure guages. ***** SOLD *****

*BMR silver chrome moly race LCA's w/ heim joints. ***SOLD***

*BMR silver k-member w/ mounts for LS1. ****SOLD ****

*BMR silver Lower front control arms. ****SOLD ****

*QA1 f series shocks front and rear with 275 lb front springs. and spanner wrench. $742 new. sell ****SOLD ****

*Hooker 1 3/4" headers I had coated by my guy I use to ceramic coat my stuff. the coating is far better then hookers.****SOLD ****

*mufflex offroad y-pipe ceramic coated by my guy and clearanced for wolfe torque arm. ****SOLD ****

*mufflex 4" catback with spintech muffler and dual out. The whole exhaust is coated including the muffler. brand new 3" stainless tips never used and proffesionaly polished. Ive got $1000 in this setup. ****SOLD ****

*stealth airlid assembly that uses corvette zr1 filter which is much larger then stock unit. flows way more air the stock setup. top and bottom piece.comes with K&N filter and fernco coupler ****SOLD ****

*thunder racing line lock kit with brakelines, valve, wiring. nice momentary rocker swich from painless wiring. ****SOLD ****

 

pic of the z28 im parting out. heres the link:

https://ls1tech.com/forums/showt...664#post5651664

 

I added a few more things.

 

What is the backspacing on the bogarts. I will take them if it is the right backspace.

 

Whatever sjm specs them to fit on a stock width rear w/o grinding the calipers. I think its 7.5" bs on the rears

 

do you have the springs for the rear with that qa1 suspension

 

the best spring to use is a stock V8 spring. I do have a set I'll throw in for $40 that comes with the rubber isolators.

 

all 20 pm's replied...lol

 

Willing to part with the Autometer CF series oil pressure gauge by itself? Come with all the necessary hardware, etc?

If so, shoot me a price.

Any close up pics? If so, send them to: JWhiteUAH - at - Hotmail - dot - com

Thanks!

 

can i get your # so i can you or call me at 864 5252 3827 i will take the rear and maybe the front stuff except the k member call me thanks Johnny

 

marv sorry i want to keep it together. 1 bad, you got a pm.

 

this guy is a great seller! bump for you

 

Is the rear complete??

 

Thanks Red.

Sr.71. As stated in the description, its just the housing and antiroll. I have the axles im selling with it listed right below.

Im keeping the center section. Its a $2100 mark williams unit.

 

damn if those were 15x10 wheels i think i would have to sell mine and buy those from ya...totatop, good luck

 

there 9.75's...lol. Its what sjm specs to fit on these cars.

 

ttt. everything still for sale. Been told 3 times over people were buying stuff then dont hear from them. Please only pm me if your serious. thanks

 

pm sent

 

Bogarts, Guages, and fan switch sold. thanks guys

 

added a few pics of stuff I took off the car.