My intake is forsale!!!!!!
08-31-2006, 01:43 PM
#1
8 second mod
Thread Starter
iTrader: (37)
Join Date: Nov 2002
Location: East Side Performance! mASShole
Posts: 17,879
Likes: 0
Received 0 Likes
on
0 Posts
My intake is forsale!!!!!! any interest in this from anyone?
its a fast 90 custom painted silver, Nick Williams T-body (hand polished)
2 stage preditor nossles with 8 of the biggest noids Colf fussion has (i believe good for 400 or more HP EACH!!
let me know, it wont be cheep, but it will be a bolt on intake throw rails and injectors in it, and it is DONE!
i will also have my stand alone setup able to sell with it. pump to regulators ect. if your looking for a bad *** package, this is it!!!!!!!
went 9.0 with this setup on my car and ran out of spray about 800-900 feet out!!!! on the right motor, this thing will put a car into the 8's with eas
its a fast 90 custom painted silver, Nick Williams T-body (hand polished)
2 stage preditor nossles with 8 of the biggest noids Colf fussion has (i believe good for 400 or more HP EACH!!
let me know, it wont be cheep, but it will be a bolt on intake throw rails and injectors in it, and it is DONE!
i will also have my stand alone setup able to sell with it. pump to regulators ect. if your looking for a bad *** package, this is it!!!!!!!
went 9.0 with this setup on my car and ran out of spray about 800-900 feet out!!!! on the right motor, this thing will put a car into the 8's with eas
08-31-2006, 02:01 PM
#4
8 second mod
Thread Starter
iTrader: (37)
Join Date: Nov 2002
Location: East Side Performance! mASShole
Posts: 17,879
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by WhiteKnightZ28
This...
lol
Im going to do a motor setup i think. try to go low 10's high 9's on motor, put a small shot on it when that stops being fun.
while saving money to build a real setup!!!!!
Trending Topics
09-01-2006, 12:57 PM
#9
8 second mod
Thread Starter
iTrader: (37)
Join Date: Nov 2002
Location: East Side Performance! mASShole
Posts: 17,879
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Whip
Guys, I stopped by the Noyzee garage last night and saw his new set up. He asked me not to say anything, but I couldn't resist, I have to post the pic I snapped!!
09-01-2006, 02:22 PM
#11
TECH Enthusiast
Join Date: Dec 2003
Posts: 628
Likes: 0
Received 0 Likes
on
0 Posts
eric it was good to see u a couple of nights ago, its tuff but u kinda know what i am going threw, although ur outcome was a lot worse but thatnks for talking with me kinda felt good to get it off my chest
09-05-2006, 01:08 PM
#14
TECH Fanatic
iTrader: (4)
Join Date: Dec 2003
Location: Phila, Pennsyltucky
Posts: 1,520
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Noyzee
haha, wait till in in your house doing your heat. you are so fucked
09-08-2006, 12:16 AM
#15
12 Second Club
iTrader: (1)
Join Date: Apr 2004
Location: Clarksville, TN
Posts: 1,369
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Noyzee
any interest in this from anyone?
its a fast 90 custom painted silver, Nick Williams T-body (hand polished)
2 stage preditor nossles with 8 of the biggest noids Colf fussion has (i believe good for 400 or more HP EACH!!
let me know, it wont be cheep, but it will be a bolt on intake throw rails and injectors in it, and it is DONE!
i will also have my stand alone setup able to sell with it. pump to regulators ect. if your looking for a bad *** package, this is it!!!!!!!
went 9.0 with this setup on my car and ran out of spray about 800-900 feet out!!!! on the right motor, this thing will put a car into the 8's with eas
its a fast 90 custom painted silver, Nick Williams T-body (hand polished)
2 stage preditor nossles with 8 of the biggest noids Colf fussion has (i believe good for 400 or more HP EACH!!
let me know, it wont be cheep, but it will be a bolt on intake throw rails and injectors in it, and it is DONE!
i will also have my stand alone setup able to sell with it. pump to regulators ect. if your looking for a bad *** package, this is it!!!!!!!
went 9.0 with this setup on my car and ran out of spray about 800-900 feet out!!!! on the right motor, this thing will put a car into the 8's with eas
Hey Brad, how much are you selling it for? You can PM me if you want, but I've got a buddy in TN that's looking to spray his forged H/C motor...
09-08-2006, 09:41 AM
#16
8 second mod
Thread Starter
iTrader: (37)
Join Date: Nov 2002
Location: East Side Performance! mASShole
Posts: 17,879
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by CamTom12
Hey Brad, how much are you selling it for? You can PM me if you want, but I've got a buddy in TN that's looking to spray his forged H/C motor...
thats not a bad idea...