Delphi/ Lucas 32#/hr injectors $230
09-05-2006, 10:32 PM
#1
TECH Resident
Thread Starter
iTrader: (17)
Join Date: Sep 2004
Location: NC - Charlotte area
Posts: 3,747
Likes: 0
Received 0 Likes
on
0 Posts
Delphi/ Lucas 32#/hr injectors $200 these injectors have about 4k miles on them and have been kept in excellent condition. I know the offset table you need to use with them and I know what def and min injector pulse widths to use with them, and the IFR.
$200 ;will be shipping UPS
I will have pictures up soon, but these are the ones where you cannot use the retainers, which is fine still as they were fine on my car.
Part Number Delphi D17208A (Lucas old 5207009, Lucas New 621020)
Static Flow Rate @ 43.5PSI (300kPa) = 31.6 lb/hr = 332cc/min = 239g/m
Static Flow Rate @ 58.0PSI (400kPa) = 36.5 lb/hr = 384cc/min = 276g/m
Dynamic Flow Rate @ 43.5PSI (300kPa) = 6.68 gm/pulse - 2.5ms pulse width and 10ms repetition rate
Dynamic Flow Rate @ 58.0PSI (400kPa) = 7.72 gm/pulse - 2.5ms pulse width and 10ms repetition rate
Coil Resistance: 16.2 Ohms / High Impedance / High-Z (No ECM driver modifications required)
Image quality has been reduced so image will fit on here. if you want good pictures pm me your email address
$200 ;will be shipping UPS
I will have pictures up soon, but these are the ones where you cannot use the retainers, which is fine still as they were fine on my car.
Part Number Delphi D17208A (Lucas old 5207009, Lucas New 621020)
Static Flow Rate @ 43.5PSI (300kPa) = 31.6 lb/hr = 332cc/min = 239g/m
Static Flow Rate @ 58.0PSI (400kPa) = 36.5 lb/hr = 384cc/min = 276g/m
Dynamic Flow Rate @ 43.5PSI (300kPa) = 6.68 gm/pulse - 2.5ms pulse width and 10ms repetition rate
Dynamic Flow Rate @ 58.0PSI (400kPa) = 7.72 gm/pulse - 2.5ms pulse width and 10ms repetition rate
Coil Resistance: 16.2 Ohms / High Impedance / High-Z (No ECM driver modifications required)
Image quality has been reduced so image will fit on here. if you want good pictures pm me your email address
Last edited by ZL1Killa; 12-02-2006 at 12:13 PM.
Trending Topics
01-09-2007, 01:26 AM
#9
TECH Resident
Thread Starter
iTrader: (17)
Join Date: Sep 2004
Location: NC - Charlotte area
Posts: 3,747
Likes: 0
Received 0 Likes
on
0 Posts
could you deal with 160 shipped to wherever you are (meaning these things will be shipped to ya and you will recieve them in 3 days , and you will get tracking #
